Microfluidics Bibliography

97-25 Sruthy Sanjeev Ambady, Rahaf Mihyar, Rui Zhang, Mattia Tiboni, Alessio Pricci, Sven Thoröe-Boveleth, Luca Casettari, Fabian Kiessling, Josbert M. Metselaar, Twan Lammers, Roger M. Pallares, Engineering the structure and optical properties of gold nanostars with microfluidics, The Journal of Physical Chemistry C, 129.21; pp. 9819-9828, 2025. doi.org/10.1021/acs.jpcc.5c02395

109-24 Dileep Karnam, Yu-Lung Lo, Chia-Hua Yang, Spray mist-assisted drilling of through silicon vias (TSV) using nanosecond laser: Influence of CNT nanofluid, Journal of Materials Research and Technology, 31; pp. 679-688, 2024. doi.org/10.1016/j.jmrt.2024.06.109

196-23 Daicong Zhang, Chunhui Jing, Wei Guo, Yuan Xiao, Jun Luo, Lehua Qi, Microchannels formed using metal microdroplets, Micromachines, 14.10; 1922, 2023. doi.org/10.3390/mi14101922

121-23 Feng Lin Ng, Zhanhong Cen, Yi-Chin Toh, Lay Poh Tan, A 3D-printed micro-perfused culture device with embedded 3D fibrous scaffold for enhanced biomimicry, International Journal of Bioprinting, 2023. doi.org/10.36922/ijb.0226

104-23 Cristina González-Fernández, Jenifer Gómez-Pastora, Eugenio Bringas, Inmaculada Ortiz, Computer-aided design of magnetophoretic microfluidic systems for enhanced recovery of target products, 33rd European Symposium on Computer-Aided Engineering (ESCAPE), 2023.

64-23   Tihomir Tjankov, Dimitar Trifonov, Conceptual design and 3D modeling of a microfluidic device for liver cells investigation, Industry 4.0, 8.2; pp. 39-41, 2023.

34-23   Chao Kang, Ikki Ikeda, Motoki Sakaguchi, Recoil and solidification of a paraffin droplet impacted on a metal substrate: Numerical study and experimental verification, Journal of Fluids and Structures, 118; 103839, 2023. doi.org/10.1016/j.jfluidstructs.2023.103839

64-22   Babatunde Aramide, Computational modelling of electrohydrodynamic jetting (Taylor cone formation, dripping & jet evolution): Case study of electrospinning, Thesis, University College London, 2022.

42-22   Islam Hassan, P. Ravi Selvaganapathy, Microfluidic printheads for highly switchable multimaterial 3D printing of soft materials, Advanced Materials Technologies, 2101709, 2022. doi.org/10.1002/admt.202101709

138-21   Enver Guler, Mine Eti, Aydin Cihanoglu, Esra Altiok, Kadriye Ozlem Hamaloglu, Burcu Gokcal, Ali Tuncel, Nalan Kabay, Ion exchange membranes with enhanced antifouling properties to produce energy from renewable sources, Proceedings of the 6th International Symposium on Green and Smart Technologies for a Sustainable Society, 2021.

45-21   Navid Tonekaboni, Mahdi Feizbahr, Nima Tonekaboni, Guang-Jun Jiang, Hong-Xia Chen, Optimization of solar CCHP systems with collector enhanced by porous media and nanofluid, Mathematical Problems in Engineering, 2021; 9984940, 2021. doi.org/10.1155/2021/9984840

40-21   B. Hayes, G.L. Whiting, R. MacCurdy, Modeling of contactless bubble–bubble interactions in microchannels with integrated inertial pumps, Physics of Fluids, 33.4; 042002, 2021. doi.org/10.1063/5.0041924

14-21   Jian-Chiun Liou, Chih-Wei Peng, Philippe Basset, Zhen-Xi Chen, DNA printing integrated multiplexer driver microelectronic mechanical system head (IDMH) and microfluidic flow estimation, Micromachines, 12.1; 25, 2021. doi.org/10.3390/mi12010025

08-20   Li Yong-Qiang, Dong Jun-Yan, Rui Wei, Numerical simulation for capillary driven flow in capsule-type vane tank with clearances under microgravity, Microgravity Science and Technology, 2020. doi.org/10.1007/s12217-019-09773-z

89-19   Tim Dreckmann, Julien Boeuf, Imke-Sonja Ludwig, Jorg Lumkemann, Jorg Huwyler, Low volume aseptic filling: impact of pump systems on shear stress, European Journal of Pharmaceutics and Biopharmaceutics, 147; pp. 10-18, 2019. doi.org/10.1016/j.ejpb.2019.12.006

88-19  V. Amiri Roodan, J. Gomez-Pastora, C. Gonzalez-Fernandez, I.H. Karampelas, E. Bringas, E.P. Furlani, I. Ortiz, CFD analysis of the generation and manipulation of ferrofluid droplets, TechConnect Briefs, pp. 182-185, 2019.

55-19  Julio Aleman, Sunil K. George, Samuel Herberg, Mahesh Devarasetty, Christopher D. Porada, Aleksander Skardal, Graça Almeida‐Porada, Deconstructed microfluidic bone marrow on‐a‐chip to study normal and malignant hemopoietic cell–niche interactions, Small, 2019. doi.org/10.1002/smll.201902971

37-19     Feng Lin Ng, Miniaturized 3D fibrous scaffold on stereolithography-printed microfluidic perfusion culture, Thesis, Nanyang Technological University, 2019.

32-19 Jenifer Gómez-Pastora, Ioannis H. Karampelas, Eugenio Bringas, Edward P. Furlani, Inmaculada Ortiz, Numerical analysis of bead magnetophoresis from flowing blood in a continuous-flow microchannel: Implications to the bead-fluid interactions, Nature: Scientific Reports, 9; 7265, 2019. doi.org/10.1038/s41598-019-43827-x

75-18 Tobias Ladner, Sebastian Odenwald, Kevin Kerls, Gerald Zieres, Adeline Boillon, Julien Bœuf, CFD supported investigation of shear induced by bottom-mounted magnetic stirrer in monoclonal antibody formulation, Pharmaceutical Research, 35, 2018. doi.org/10.1007/s11095-018-2492-4

53-18 Venoos Amiri Roodan, Jenifer Gómez-Pastora, Aditi Verma, Eugenio Bringas, Inmaculada Ortiz, Edward P. Furlani, Computational analysis of magnetic droplet generation and manipulation in microfluidic devices, Proceedings, 5th International Conference of Fluid Flow, Heat and Mass Transfer, 154, 2018. doi.org/10.11159/ffhmt18.154

35-18 Jenifer Gómez-Pastora, Cristina González Fernández, Marcos Fallanza, Eugenio Bringas, Inmaculada Ortiz, Flow patterns and mass transfer performance of miscible liquid-liquid flows in various microchannels: Numerical and experimental studies, Chemical Engineering Journal, 344; pp. 487-497, 2018. doi.org/10.1016/j.cej.2018.03.110

15-18 J. Gómez-Pastora, I.H. Karampelas, A.Q. Alorabi, M.D. Tarn, E. Bringas, A. Iles, V.N. Paunov, N. Pamme, E.P. Furlani, I. Ortiz, CFD analysis and experimental validation of magnetic droplet generation and deflection across multilaminar flow streams, TechConnect Briefs, 3; pp. 182-185, 2018.

14-18 J. Gómez-Pastora, C. González-Fernández, I.H. Karampelas, E. Bringas, E.P. Furlani, I. Ortiz, Design of magnetic blood cleansing microdevices through experimentally validated CFD modeling, TechConnect Briefs, 3; pp. 170-173, 2018.

10-18 A. Gupta, I.H. Karampelas, J. Kitting, Numerical modeling of the formation of dynamically configurable L2 lens in a microchannel, TechConnect Briefs, 3; pp. 186 – 189, 2018.

17-17 I.H. Karampelas, J. Gómez-Pastora, M.J. Cowan, E. Bringas, I. Ortiz, E.P. Furlani, Numerical analysis of acoustophoretic discrete particle focusing in microchannels, TechConnect Briefs, 3; pp. 174-177, 2017.

16-17 J. Gómez-Pastora, I.H. Karampelas, E. Bringas, E.P. Furlani, I. Ortiz, CFD analysis of particle magnetophoresis in multiphase continuous-flow bioseparators, TechConnect Briefs, 3; pp. 170 – 173, 2017.

102-16 J. Brindha, RA.G. Privita Edwina, P.K. Rajesh, P.Rani, Influence of rheological properties of protein bio-inks on printability: A simulation and validation study, Materials Today: Proceedings, 3.10; pp. 3285-3295, 2016. doi.org/10.1016/j.matpr.2016.10.010

99-16 Ioannis H. Karampelas, Kai Liu, Fatema Alali, Edward P. Furlani, Plasmonic nanoframes for photothermal energy conversion, The Journal of Physical Chemistry C, 120.13; pp. 7256-7264, 2016. doi.org/10.1021/acs.jpcc.5b12743

98-16 Jelena Dinic, Vivek Sharma, Drop formation, pinch-off dynamics and liquid transfer of simple and complex fluids, Proceedings, APS March Meeting, 61.2, 2016.

58-16 Naoki Morita, Amol A. Khalate, Arend M.van Buul, Herman Wijshoff, Inkjet Printheads, Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets, Ed. Stephen D. Hoath, Ch 3; pp. 57-92, 2016. doi.org/10.1002/9783527684724.ch3

57-16 Ioannis Karampelas, Computational analysis of pulsed-laser plasmon-enhanced photothermal energy conversion and nanobubble generation in the nanoscale, Thesis, University at Buffalo SUNY, New York, USA, 2016.

44-16 Takeshi Sawada, et al, Prognostic impact of circulating tumor cell detected using a novel fluidic cell microarray chip system in patients with breast cancer, EBioMedicine, 11; pp. 173-182, 2016. doi.org/10.1016/j.ebiom.2016.07.027

30-16 Ioannis H. Karampelas, Kai Liu, Edward P. Furlani, Plasmonic nanocages as photothermal transducers for nanobubble cancer therapy, TechConnect Briefs, 3; pp. 165-168, 2016.

125-15 J. Berthier, K.A. Brakke, E.P. Furlani, I.H. Karampelas, V. Poher, D. Gosselin, M. Cubinzolles, P. Pouteau, Whole blood spontaneous capillary flow in narrow V-groove microchannels, Sensors and Actuators B: Chemical, 206; pp. 258-267, 2015.

77-15 Ho-Lin Tsai, Weng-Sing Hwang, Jhih-Kai Wang, Wen-Chih Peng, Shin-Hau Chen, Fabrication of microdots using piezoelectric dispensing technique for viscous fluids, Materials, 8.10; pp. 7006-7016, 2015. doi.org/10.3390/ma8105355

58-15 Diana Gaulke, Michael E. Dreyer, CFD simulation of capillary transport of liquid between parallel perforated plates using FLOW-3D, Microgravity Science and Technology, 27; pp. 261-271, 2015. doi.org/10.1007/s12217-015-9449-6

3-15 Hanchul Cho, Sivasubramanian Somu, Jin Young Lee, Hobin Jeong and Ahmed Busnaina, High-rate nanoscale offset printing process using directed assembly and transfer of nanomaterials, Materials Views, 2015. doi.org/10.1002/adma.201404769

122-14 Albert Chi, Sebastian Curi, Kevin Clayton, David Luciano, Kameron Klauber, Alfredo Alexander-Katz, Sebastián D’hers, Noel M Elman, Rapid reconstitution packages (RRPs) implemented by integration of computational fluid dynamics (CFD) and 3D printed microfluidics, Drug Delivery and Translational Research, 4; pp. 320-333, 2014. doi.org/10.1007/s13346-014-0198-7

113-14 Cihan Yilmaz, Arif E. Cetin, Georgia Goutzamanidis, Jun Huang, Sivasubramanian Somu, Hatice Altug, Dongguang Wei, Ahmed Busnaina, Three-dimensional crystalline and homogeneous metallic nanostructures using directed assembly of nanoparticles, ACS Nano, 8.5; pp. 4547-4558, 2014. doi.org/10.1021/nn500084g

110-14 Koushik Ponnuru, Jincheng Wu, Preeti Ashok, Emmanuel S. Tzanakakis, Edward P. Furlani, Analysis of stem cell culture performance in a microcarrier bioreactor system, TechConnect Briefs, 2; pp. 132-135, 2014.

109-14 Ioannis H. Karampelas, Young Hwa Kim, Edward P. Furlani, Numerical analysis of laser induced photothermal effects using colloidal plasmodic nanostructures, TechConnect Briefs, 1; pp. 312-315, 2014.

108-14 Chenxu Liu, Xiaozheng Xue, Edward P. Furlani, Numerical analysis of fully-coupled particle-fluid transport and free-flow magnetophoretic sorting in microfluidic systems, TechConnect Briefs, 2014.

85-14 Sudhir Srivastava, Lattice Boltzmann method for contact line dynamics, Thesis, Eindhoven University of Technology, 2014. doi.org/10.6100/IR772870

61-14 Chenxu Liu, A computational model for predicting fully-coupled particle-fluid dynamics and self assembly for magnetic particle applications, Thesis, State University of New York at Buffalo, 2014.

21-14 Suk-Hee Park, Ung Hyun Koh, Mina Kim, Dong-Yol Yang, Kahp-Yang Suh, Jennifer Hyunjong Shin, Hierarchical multilayer assembly of an ordered nanofibrous scaffold via thermal fusion bonding, Biofabrication, 6; 02407. doi.org/10.1088/1758-5082/6/2/024107

73-13 Oliver G. Harlen,  J. Rafael Castrejón-Pita, Arturo Castrejon-Pita, Asymmetric detachment from angled nozzles plates in drop-on demand inkjet printing, NIP & Digital Fabrication Conference, 2013.

63-13 Fatema Alali, Ioannis H. Karampelas, Young Hwa Kim, Edward P. Furlani, Photonic and thermofluidic analysis of colloidal plasmonic nanorings and nanotori for pulsed-laser photothermal applications, The Journal of Physical Chemistry C, 117.39; pp. 20178–20185, 2013. doi.org/10.1021/jp406986y

10-13 Pamela J. Waterman, CFD: shaping the medical world, Desktop Engineering, 2013.

90-12 Charles R. Ortloff and Martin Vogel, Spray Cooling Heat Transfer- Test and CFD Analysis, Electronics Cooling, June 2012. 

79-12 Daniel Parsaoran Siregar, Numerical simulation of evaporation and absorption of inkjet printed droplets, Thesis, Technische Universiteit Eindhoven, 2012.

71-12 Jong-hyeon Chang, Kyu-Dong Jung, Eunsung Lee, Minseog Choi, Seungwan Lee, Woonbae Kim, Varifocal liquid lens based on microelectrofluidic technology, Optics Letters, 37.21; pp. 4377–4379, 2012. doi.org/10.1364/OL.37.004377

70-12 Jong-hyeon Chang, Kyu-Dong Jung, Eunsung Lee, Minseog Choi, Seungwan Lee, Microelectrofluidic iris for variable aperture, Proceedings of SPIE 8252, MOEMS and Miniaturized Systems XI, 82520O, 2012. doi.org/10.1117/12.906587

69-12 Jong-hyeon Chang, Eunsung Lee, Kyu-Dong Jung, Seungwan Lee, Minseog Choi, Woonbae Kim, Microelectrofluidic lens for variable curvature, Proceedings of SPIE 8486, Current Developments in Lens Design and Optical Engineering XIII, 84860X, 2012. doi.org/10.1117/12.925852

61-12 Biddut Bhattacharjee, Study of droplet splitting in an electrowetting based digital microfluidic system, Thesis, University of British Columbia, 2012.

55-12 Hejun Li, Pengyun Wang, Lehua Qi, Hansong Zuo, Songyi Zhong, Xianghui Hou, 3D numerical simulation of successive deposition of uniform molten Al droplets on a moving substrate and experimental validation, Computational Materials Science, 65; pp. 291–301, 2012.

54-12 Edward P. Furlani, Anthony Nunez, Gianmarco Vizzeri, Modeling fluid structure-interactions for biomechanical analysis of the human eye, Nanotech Conference & Expo, 2012.

53-12 Xinyun Wu, Richard D. Oleschuk, Natalie M. Cann, Characterization of microstructured fibre emitters in pursuit of improved nano electrospray ionization performance, Analyst, 2012. doi.org/10.1039/c2an35249d

25-12 Edward P. Furlani, Ioannis H. Karampelas, Qian Xie, Analysis of pulsed laser plasmon-assisted photothermal heating and bubble generation at the nanoscale, Lab on a Chip, 2012. doi.org/10.1039/C2LC40495H

22-12 R. A. Sultanov, D. Guster, Numerical modeling and simulations of pulsatile human blood flow in different 3D-geometries, Fluid Dynamics, Computational Modeling and Applications, InTech; pp. 475, ISBN 978-953-51-0052-2, 2012.

21-12 Guo-Wei Huang, Tzu-Yi Hung, Chin-Tai Chen, Design, simulation, and verification of fluidic light-guide chips with various geometries of micro polymer channels, NEMS, 2012.

103-11 Suk-Hee Park, Development of three-dimensional scaffolds containing electrospun nanofibers and their applications to tissue regeneration, Thesis, KAIST, 2011.

81-11 Xinyun Wu, Modeling and characterization of microfabricated emitters – in pursuit of improved ESI-MS performance, Thesis, Queen’s University, 2011.

79-11 Cong Lu, A cell preparation stage for automatic cell injection, Thesis, University of Toronto, 2011.

77-11 Ge Bai, W. Thomas Leach, Computational fluid dynamics (CFD) insights into agitation stress methods in biopharmaceutical development, International Journal of Pharmaceutics, 2011. doi.org/10.1016/j.ijpharm.2011.11.044

45-11 Chang-Wei Kang, Jiak Kwang Tan, Lunsheng Pan, Cheng Yee Low, Ahmed Jaffar, Numerical and experimental investigations of splat geometric characteristics during oblique impact of plasma spraying, Applied Surface Science, 2011. doi.org/10.1016/j.apsusc.2011.06.081

33-11 Edward P. Furlani, Mark T. Swihart, Natalia Litchinitser, Christopher N. Delametter, Melissa Carter, Modeling nanoscale plasmon-assisted bubble nucleation and applications, Nanotech Conference and Expo, 2011.

32-11 Cong Lu, James K. Mills, Three cell separation design for realizing automatic cell injection, IEEE/ICME International Conference on Complex Medical Engineering, 2011. doi.org/10.1109/ICCME.2011.5876811

25-11 Issam M. Bahadur, James K. Mills, Fluidic vacuum-based biological cell holding device with piezoelectrically induced vibration, IEEE/ICME International Conference on Complex Medical Engineering, 2011.

14-11 Edward P. Furlani, Roshni Biswas, Alexander N. Cartwright, Natalia M. Litchinitser, Antiresonant guiding optofluidic biosensor, Optics Communications, 2011. doi.org/10.1016/j.optcom.2011.04.014

05-11 Hyeju Eom, Keun Park, Integrated numerical analysis to evaluate replication characteristics of micro channels in a locally heated mold by selective induction, International Journal of Precision Engineering and Manufacturing, 12.1; pp. 53–60, 2011. doi.org/10.1007/s12541-011-0007-x

70-10 I. N. Volnov, V. S. Nagornyi, Modeling processes for generation of streams of monodispersed fluid droplets in electro-inkjet applications, Science and Technology News, St. Petersburg State Polytechnic University, 4; pp. 294–300, 2010.

62-10 F. Mobadersani, M. Eskandarzade, S. Azizi, S. Abbasnezhad, Effect of ambient pressure on bubble growth in micro-channel and its pumping effect, ASME 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010-24436; pp. 577–584, 2010. doi.org/10.1115/ESDA2010-24436

51-10 Regina Bleul, Marion Ritzi-Lehnert, Julian Höth, Nico Scharpfenecker, Ines Frese, Dominik Düchs, Sabine Brunklaus, Thomas E. Hansen-Hagge, Franz-Josef Meyer-Almes, Klaus S. Drese, Compact, cost-efficient microfluidics-based stopped-flow device, Analytical and Bioanalytical Chemistry, 2010. doi.org/10.1007/s00216-010-4446-5

22-10 Krishnendu Chakrabarty, Richard B. Fair, Jun Zeng, Design tools for digital microfluidic biochips toward functional diversification and more than Moore, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 29.7; 2010.

14-10 E. P. Furlani, M. S. Hanchak, Nonlinear analysis of the deformation and breakup of viscous microjets using the method of lines, International Journal for Numerical Methods in Fluids, 2010. doi.org/10.1002/fld.2205

55-09 R. A. Sultanov, D. Guster, Computer simulations of pulsatile human blood flow through 3D models of the human aortic arch, vessels of simple geometry and a bifurcated artery, 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society; pp. 4704–4710, 2009.

30-09 Anurag Chandorkar, Shayan Palit, Simulation of droplet dynamics and mixing in microfluidic devices using a VOF-based method, Sensors & Transducers, 7; pp. 136–149, 2009.

13-09 E. P. Furlani, M. C. Carter, Analysis of an electrostatically actuated MEMS drop ejector, Nanotech Conference & Expo, 2009.

12-09 A. Chandorkar, S. Palit, Simulation of droplet-based microfluidics devices using a volume-of-fluid approach, Nanotech Conference & Expo, 2009.

3-09 Christopher N. Delametter, FLOW-3D speeds MEMS inkjet development, Desktop Engineering, 2009.

42-08 Tien-Li Chang, Jung-Chang Wang, Chun-Chi Chen, Ya-Wei Lee, Ta-Hsin Chou, A non-fluorine mold release agent for Ni stamp in nanoimprint process, Microelectronic Engineering, 85; pp. 1608–1612, 2008.

26-08 Pamela J. Waterman, First-pass CFD analyses – Part 2, Desktop Engineering, 2008.

09-08 M. Ren, H. Wijshoff, Thermal effect on the penetration of an ink droplet onto a porous medium, Eurotherm MNH, 1; 2008.

04-08 Christopher N. Delametter, MEMS development in less than half the time, Small Times, 2008.

02-08 Renat A. Sultanov, Dennis Guster, Brent Engelbrekt, Richard Blankenbecler, 3D computer simulations of pulsatile human blood flows in vessels and in the aortic arch – investigation of non-Newtonian characteristics of human blood, Journal of Computational Physics, 2008.

01-08 Herman Wijshoff, Structure- and fluid dynamics in piezo inkjet printheads, Thesis, University of Twente, 2008.

30-07 A. K. Sen, J. Darabi, D. R. Knapp, Simulation and parametric study of a novel multi-spray emitter for ESI-MS applications, Microfluidics and Nanofluidics, 3.3; pp. 283–298, 2007.

28-07 Dan Soltman, Vivek Subramanian, Inkjet-printed line morphologies and temperature control of the coffee ring effect, Langmuir, 2008. doi.org/10.1021/la7026847

23-07 A. K. Sen, J. Darabi, Droplet ejection performance of a monolithic thermal inkjet print head, Journal of Micromechanics and Microengineering, 17; pp. 1420–1427, 2007. doi.org/10.1088/0960-1317/17/8/002

18-07 Herman Wijshoff, Better printheads via simulation, Desktop Engineering, 13.2; 2007.

17-07 Jos de Jong, Air entrapment in piezo inkjet printing, Thesis, University of Twente, 2007.

15-07 Krishnendu Chakrabarty, Jun Zeng, eds., Design Automation Methods and Tools for Microfluidics-Based Biochips, Springer, 2006.

14-07 Fei Su, Jun Zeng, Computer-aided design and test for digital microfluidics, IEEE Design & Test of Computers, 24.1; pp. 60–70, 2007.

13-07 Jun Zeng, Modeling and simulation of electrified droplets and its application to computer-aided design of digital microfluidics, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 25.2; pp. 224–233, 2006.

12-07 Krishnendu Chakrabarty, Jun Zeng, Automated top-down design for microfluidic biochips, ACM Journal on Emerging Technologies in Computing Systems, 1.3; pp. 186–223, 2005.

01-07 Herman Wijshoff, Drop formation mechanisms in piezo-acoustic inkjet, NSTI-Nanotech, ISBN 1420061844; Vol. 3, 2007.

23-06 John J. Uebbing, Stephan Hengstler, Dale Schroeder, Shalini Venkatesh, Rick Haven, Heat and fluid flow in an optical switch bubble, Journal of Microelectromechanical Systems, 15.6; 2006.

21-06 Herman Wijshoff, Manipulating drop formation in piezo acoustic inkjet, IS&T NIP22; p. 79, 2006.

20-06 J. de Jong, H. Reinten, M. van den Berg, H. Wijshoff, M. Versluis, G. de Bruin, A. Prosperetti, D. Lohse, Air entrapment in piezo-driven inkjet printheads, Journal of the Acoustical Society of America, 120.3; p. 1257, 2006.

11-06 A. K. Sen, J. Darabi, D. R. Knapp, J. Liu, Modeling and characterization of a carbon fiber emitter for electrospray ionization, 2006.

5-06 E. P. Furlani, B. G. Price, G. Hawkins, A. G. Lopez, Thermally induced Marangoni instability of liquid microjets with application to continuous inkjet printing, NSTI Nanotech Conference, 2; pp. 534–537, 2006.

28-05 O. B. Fawehinmi, P. H. Gaskell, P. K. Jimack, N. Kapur, H. M. Thompson, A combined experimental and computational fluid dynamics analysis of the dynamics of drop formation, Proceedings of the Institution of Mechanical Engineers, Part C, 2005. doi.org/10.1243/095440605X31788

5-05 E. P. Furlani, Thermal modulation and instability of Newtonian liquid microjets, Nanotech Conference, 2005.

12-04 Jun Zeng, Tom Korsmeyer, Principles of droplet electrohydrodynamics for lab-on-a-chip, Lab on a Chip, 4.4; pp. 265–277, 2004.

9-04 Constantine N. Anagnostopoulos, James M. Chwalek, Christopher N. Delametter, Gilbert A. Hawkins, David L. Jeanmaire, John A. Lebens, Ali Lopez, David P. Trauernicht, Micro-jet nozzle array for precise droplet metering and steering having increased droplet deflection, 12th International Conference on Solid State Sensors, Actuators and Microsystems; pp. 368–371, 2003.

8-04 Christopher N. Delametter, David P. Trauernicht, James M. Chwalek, Novel microfluidic jet deflection – significant modeling challenge with great application potential, NSTI International Conference on Modeling and Simulation of Microsystems; pp. 44–47, 2002.

6-04 D. Vadillo, G. Desie, A. Soucemarianadin, Spreading behavior of single and multiple drops, 21st International Congress of Theoretical and Applied Mechanics, 2004.

2-04 Herman Wijshoff, Free surface flow and acousto-elastic interaction in piezo inkjet, NSTI Nanotech Conference, 2004.

30-03 D. Souders, I. Khan, G. F. Yao, Alessandro Incognito, Matteo Corrado, A numerical model for simulation of combined electroosmotic and pressure driven flow in microdevices, 7th International Symposium on Fluid Control, Measurement and Visualization, 2003.

27-03 Jun Zeng, Daniel Sobek, Tom Korsmeyer, Electro-hydrodynamic modeling of electrospray ionization – CAD for a µfluidic device-mass spectrometer interface, Transducers, 2003.

17-03 John Uebbing, Switching fiber-optic circuits with microscopic bubbles, Sensors Magazine, 20.5; pp. 36–42, 2003.

16-03 CFD speeds development of MEMS-based printing technology, MicroNano Magazine, 8.6; p. 16, 2003.

3-03 Simulation speeds design of microfluidic medical devices, R&D Magazine, 2003; pp. 18–19.

1-03 Simulations help microscopic bubbles switch fiber-optic circuits, Fiberoptic Product News, 2003; pp. 22–23.

27-02 James Q. Feng, A general fluid dynamic analysis of drop ejection in drop-on-demand ink jet devices, Journal of Imaging Science and Technology, 46.5; 2002.

1-02 Feixia Pan, Joel Kubby, Jingkuang Chen, Numerical simulation of fluid structure interaction in a MEMS diaphragm drop ejector, Journal of Micromechanics and Microengineering, 12; pp. 70–76, 2002.

48-01 Rainer Gruber, Radial mass transfer enhancement in bubble-train flow, Thesis, RWTH Aachen, 2001.

34-01 E. P. Furlani, C. N. Delametter, J. M. Chwalek, D. Trauernicht, Surface tension induced instability of viscous liquid jets, 4th International Conference on Modeling and Simulation of Microsystems, 2001.

12-01 C. N. Delametter, Micro resolution, Mechanical Engineering, 123.7; pp. 70–72, 2001.

9-01 Aman Khan, Effects of Reynolds number on surface rolling in small drops, ASME PVP, 431; 2001.

2-00 Narayan V. Deshpande, Significance of inertance and resistance in fluidics of thermal ink-jet transducers, Journal of Imaging Science and Technology, 40.5; pp. 457–461, 1996.

4-98 D. Deitz, Connecting the dots with CFD, Mechanical Engineering Magazine, pp. 90–91, 1998.

14-94 M. P. O’Hare, N. V. Deshpande, D. J. Drake, Drop generation processes in TIJ printheads, IS&T 10th International Congress on Advances in Non-Impact Printing, 1994.

14-92 A. Asai, Three-dimensional calculation of bubble growth and drop ejection in a bubble jet printer, Journal of Fluids Engineering, 114; pp. 638–641, 1992.