Solving the World’s Toughest CFD Problems

Water and Environmental Bibliography

Automotive Bibliography

Below is a collection of technical papers in our Automotive Bibliography. All of these papers feature FLOW-3D results. Learn more about how  FLOW-3D can be used to successfully simulate applications for the Automotive Industry.

159-22 Shihao Li, Yan Yan, Wei Wei, Zhao Wang, Zhonghua Ni, Numerical simulation on the thermal dynamic behavior of liquid hydrogen in a storage tank for trailers, Case Studies in Thermal Engineering, 40; 102520, 2022.

53-22   Ilias Papadimitriou, Michael Just, Manufacturing of structural components for internal combustion engine, electric motor and battery using casting and 3D printing, Advances in Engine and Powertrain Research and Technology, Mechanisms and Machine Science 114, Ed. Tigran Parikyan, 2022.

33-21   Xiaozhou Hu Ao Wang Pingping Li Jianing Wang, Influence of dynamic attitudes on oil supply for bearings and churning power losses in a splash lubricated spiral bevel gearbox, Tribology International, 159; 106951, 2021.

72-18 Hunchul Jeong, Kyungbae Park, Sungjin Baek, Dong-Yoon Kim, Moon-Jin Kang, Jungho Cho, Three-dimensional numerical analysis of weld pool in GMAW with fillet joint, International Journal of Precision Engineering and Manufacturing, 19.8; pp. 1171-1177, 2018.

43-18   R.A. Ibrahim, B. Singh, Assessment of ground vehicle tankers interacting with liquid sloshing dynamics, International Journal of Heavy Vehicle Systems, 25.1; 2018.

34-17   Hidenori Arisawa, Yuji Shinoda, Mitsuaki Tanaka, Tatsuhiko Goi, Hirofumi Akahori. Mamoru Yoshitomi, Classification of Fluid Dynamic Loss in Aeroengine Transmission Gears – Experimental Analysis and CFD Validation, Proceedings of ASME Turbo Expo 2017, Charlotte, NC, USA, June 26-30, 2017. 

26-15   Herbert Obame Mve, Romuald Rullière, Philippe Haberschill, Modeling and Parametric Study of the Heat Transfer Inside a Lithium Bromide Flow Confined by Wire Screen, 9; pp. 417-425. Available in shared drive: Automotive

17-15   Peyman Jafarian, Gear interlocking effect study using CFD, Flow Science, 2015.

23-14  Daiki Saegusa and Shinji Kawai, CFD Analysis of Lubricant Fluid Flow in Automotive Transmission, SAE Technical Paper 2014-01-1772, 2014, doi:10.4271/2014-01-1772, Copyright © 2014 SAE International.

15-14  Hidenori Arisawa, Motohiko Nishimura, Hideyuki Imai and Tatsuhiko Goi, CFD Simulations and Experiments for Reduction of Oil Churning Loss and Windage Loss in Aeroengine Transmission Gears, Journal of Engineering for Gas Turbines and Power, ASME, doi:10.1115/1.4026952, 2014.

87-13 Daiki Saegusa and Shinji Kawai, Technique for Prediction of Automotive Transmission Lubrication Performance, Honda R&D Technical Review, October 2013.

26-13  Hidenori Arisawa, Motohiko Nishimura, Hideyuki Imai, Kenichiro Tanaka, and Tatsuhiko Goi, CFD Simulations and Experiments for Reduction of Oil Churning Loss and Windage Loss on Aeroengine Transmission Gears, No. 2012-JCT-0705, © 2013 The Japan Society of Mechanical Engineers. In Japanese.

53-09  Hidenori Arisawa, Motohiko Nishimura, Hideyuki Imai and Tatsuhiko Goi, CFD Simulation for Reduction of Oil Churning Loss and Windage Loss on Aeroengine Transmission Gears, ASME Turbo Expo 2009: Power for Land, Sea and Air, Orlando, Florida, USA, June 8-12, 2009.

45-09 Chih-Chung Chang, Sy-Chi Kuo, Chen-Kang Huang, and Sih-Li Chen, The Investigation of Motor Cooling Performance, International Journal of Mechanical, Industrial and Aerospace Engineering, 3:1, 2009.

37-04   U, H., Cleghorn, W. and Mills, J., Design and Analysis of Fuel Tank Baffles to Reduce the Noise Generated From Fuel Sloshing, SAE Technical Paper 2004-01-0403, 2004, doi:10.4271/2004-01-0403.

38-03   Hidenori Arisawa, Katsuya Umemoto, Atsushi Ueshima and Yuichi Kawamoto, CFD Simulation of the Lubricating Oil Flow in Motorcycle Oilpan, 2003 SAE/JSAE Small Engine Technology, Conference & Exhibition, Madison, Wisconsin, USA, September 15-18, 2003.

Request More Information

FLOW-3D AM WELD Request Info

What additive manufacturing processes do you want to simulate? *
What laser welding processes do you want to simulate? *
FLOW-3D News
Privacy *