Additive Manufacturing and Welding Bibliography

69-26 Luke Sanneman, Design and optimization of extrusion system for a mobile cement paste 3D printer via CFD simulation and physical testing, Thesis, Worcester Polytechnic Institute, 2026.

67-26 Masayuki Okugawa, Yuya Furushiro, Seori Motoyama, Yuheng Liu, Takayoshi Nakano, Yuichiro Koizumi, Integrated computational and experimental study on rapid heating and cooling conditions in powder-bed fusion of Al-Si hypoeutectic alloys, Materials Transactions, 67.4; pp. 535–542, 2026. doi.org/10.2320/matertrans.MT-M2025132

63-26 M. Rais A. Taufiq, Peidong He, Qian Liu, Zhuohan Cao, Bernd Gludovatz, Xiaopeng Li, Jamie J. Kruzic, Factors controlling the residual stresses in laser powder bed fusion fabricated AlSi10Mg and Ti6Al4V, Progress in Additive Manufacturing, 11; pp. 4159–4170, 2026. doi.org/10.1007/s40964-026-01574-2

59-26 Zi Li, Zhuohan Cao, Zuhao Zhang, Michael Ferry, Jamie J. Kruzic, Xiaopeng Li, Correlations between microstructure and mechanical properties for laser powder bed fusion fabricated Ta/Fe–Mn-Si metal matrix composites revealed by machine learning, Shape Memory and Superelasticity, 2026. doi.org/10.1007/s40830-026-00606-8

56-26 Masayuki Okugawa, Haruki Yoshima, Yuheng Liu, Pan Wang, Yuichiro Koizumi, Takayoshi Nakano, Single-track investigation of rapid solidification conditions of Hastelloy-X Ni-based superalloy in laser powder-bed fusion and applicability of columnar equiaxed transition criteria, Virtual and Physical Prototyping, 21.1; e2639906, 2026. doi.org/10.1080/17452759.2026.2639906

52-26 Tong Duy Quoc, Yu-Lung Lo, M. Mohsin Raza, Chuang-Wei Chieh, Cheng-Yen Chen, Kuo-Teng Tsai, Optimization of blue laser welding for copper hairpins in EV motors, Journal of Materials Research and Technology, 42; pp. 351–364, 2026. doi.org/10.1016/j.jmrt.2026.03.043

31-26 Shun Liu, Ruiqi Guo, Menglu Wang, Hongzhi Niu, Wuxin Yang, Distinctive ductility anisotropy induced by keyhole pores in Y2O3-reinforced high-temperature titanium alloy fabricated by additive manufacturing, Materials Characterization, 233; 0116070, 2026. doi.org/10.1016/j.matchar.2026.116070

27-26 Robert Strauss, Jakob Braun, Benedikt Distl, Bernhard Mayr-Schmölzer, Gerhard Leichtfried, Lukas Kaserer, Impact of laser defocusing in the additive manufacturing of molybdenum: A simulation-backed analysis, International Journal of Refractory Metals and Hard Materials, 136; 107614, 2026. doi.org/10.1016/j.ijrmhm.2025.107614

21-26 Yang Wang, Xing He, Zhaoxia Lu, Jinbin Pu, Influence of volumetric energy density on melt pool dynamics and defects formation in laser powder bed fused of K418 superalloy, Materials Letters, 409; 140092, 2026. doi.org/10.1016/j.matlet.2026.140092

20-26 Yuanze Ma, Chen Liu, Pengfei Guo, Haoyue Li, Jianfeng Gong, Caiwang Tan, Liqun Li, Changyun Li, Hongbo Xia, Impact of laser oscillation on molten pool dynamics in narrow-gap welding of 5A06 aluminum alloy, International Communications in Heat and Mass Transfer, 172.3; 110479, 2026. doi.org/10.1016/j.icheatmasstransfer.2025.110479

18-26 Kawintra Khemabulkul, Patiparn Ninpetch, Piyapat Chuchuay, Pruet Kowitwarangkul, Scanning strategy effects on melt pool dynamics and surface quality in selective laser melting of Ti-6Al-4V, Materials Science Forum, 1173; pp. 11-18, 2026. doi.org/10.4028/p-zml07q

17-26 Jia Shui, Hong Liu, Zong-Yue Bi, Hai-Tao Wang, Lin-Yun Xian, Wei-Dong Wang, Effects of oscillating parameters on weld formation, molten pool morphology, and energy distribution during laser oscillating welding of Ti6Al4V alloy, Optics & Laser Technology, 194; 114447, 2026. doi.org/10.1016/j.optlastec.2025.114447

16-26 Kaushik Balasubramanian, Rajesh Pungampalayam Kannappan, Kanchana Manivasakan, An experimental and numerical approach to formulate binder ink for binder jetting additive manufacturing of zirconia parts, Materials Research Express, 13; 015301, 2026. doi.org/10.1088/2053-1591/ae2bca

10-26 Chen Liu, Yuanze Ma, Pengfei Guo, Haoyue Li, Yingke Wang, Jianfeng Gong, Liqun Li, Changyun Li, Hongbo Xia, Effects of oscillation amplitude and frequency in narrow-gap laser wire-filling welding of Al alloy 5A06 on the melt pool and the mechanism of pore inhibition, International Journal of Thermal Sciences, 221; 110494, 2026. doi.org/10.1016/j.ijthermalsci.2025.110494

8-26 Hongjun Qi, Zhifu Huang, Ziyi Yang, Jiaqi Deng, Zihan Chen, Jian Wang, Yangxin Jian, A novel pathway to realize the columnar-to-equiaxed transition and mechanical anisotropy suppression in SEBM of 316L, Journal of Materials Processing Technology, 347; 119155, 2026. doi.org/10.1016/j.jmatprotec.2025.119155

5-26 Fangxiang Zhang, Chuanqiang Peng, Tao Zhu, Xinliang Xie, Liping Zhou, Yang Li, Qi Chao, Guohua Fan, Tailoring single-crystal-like textures in a non-weldable Ni-based superalloy by controlling overlap behavior in laser powder bed fusion, Journal of Materials Processing Technology, 347; 119143, 2026. doi.org/10.1016/j.jmatprotec.2025.119143

2-26 Emanuele Fulco, Donato Coviello, Donato Sargente, Numerical analysis of the effect of stationary laser beam properties on Al-Si coating mixing in 22MnB5 steel, International Journal of Heat and Mass Transfer, 255.2; 127899, 2026. doi.org/10.1016/j.ijheatmasstransfer.2025.127899

249-25 Kishore Mysore Nagaraja, Laura Budde, Nick Schwarz, Jörg Hermsdorf, Dong Qian, Wei Li, Multiphysics modelling of wire-based directed energy deposition process with experimental validation, The International Journal of Advanced Manufacturing Technology, 136; pp. 925–935, 2025. doi.org/10.1007/s00170-024-14905-w

248-25 Nayan Pundhir, Oluwapelumi O. Adejumo, K. Chandrashekhara, Joseph W. Newkirk, Multiphysics modeling to assess the powder bed characteristics of Inconel 718 for a circular substrate in laser powder bed fusion, Proceedings of the 36th Annual International Solid Freeform Fabrication Symposium, 2025.

247-25 Oluwapelumi O. Adejumo, Nayan Pundhir, K. Chandrashekhara, Convolutional neural network approach for predicting melt pool dimensions in laser powder bed fusion process, Proceedings of the 36th Annual International Solid Freeform Fabrication Symposium, 2025.

246-25 Matteo Ortolani, Marcin Serdeczny, Ali Gökhan Demir, Understanding the influence of beam shape on the laser welding of copper hairpins with core/ring configurations, 44th Annual ICALEO, 2025.

245-25 Linda Ismail, Omer F. Mohamed, Andreas Schiffer, Coupled DEM-CFD numerical simulations of IN718 deposition on a Ti6Al4V substrate via laser powder bed fusion, International Mechanical Engineering Congress and Exposition, 166420, 2025. doi.org/10.1115/IMECE2025-166420

243-25 Daniel Helmuth Meile, Carl Emil Hansen Thor, Yohan Jacquet, Md Tusher Mollah, Berin Šeta, Jon Spangenberg, Computational fluid dynamics modeling of sequential multimaterial extrusion additive manufacturing, Proceedings of the 36th Annual International Solid Freeform Fabrication Symposium, 2025.

242-25 Md Tusher Mollah, Jacob Van Wonterghem, Hjalte Hedegaard Rasmussen, Dan Meng, Berin Šeta, Sahand Rahemipoor, Daniel Helmuth Meile, Navid Ranjbar, Jon Spangenberg, Computational fluid dynamics modeling and experimental analysis of rapid curing in 3D printing for structural applications, Proceedings of the 36th Annual International Solid Freeform Fabrication Symposium, 2025.

240-25 Ettore Inchiappa, Analysis of additive manufacturing process with Powder Bed Fusion Electron Beam (PBF-EB) technology through numerical simulation with FLOW-3D AM, Thesis, Politecnico di Torino, 2025.

237-25 Constantin Zenz, Peter S. Cook, Laszlo Vörös, Andreas Otto, A critical comparison of one- and two-fluid approaches for the simulation of laser-induced melt pool formation and vaporisation, Discover Materials, 5; 266, 2025. doi.org/10.1007/s43939-025-00434-0

230-25 Fen Dang, Jingxian Zhu, Meixiang Ke, Zhiwei Wang, Shifeng Wen, Yan Zhou, Cheng Zhou, Lieyun Ding, Effects of different laser scanning strategies on the morphology, microstructure, and mechanical properties of lunar regolith simulant formed by laser powder bed fusion, Additive Manufacturing Frontiers, 2025. doi.org/10.1016/j.amf.2025.200283

217-25 Ning Li, Xu Tang, Lin Li, Yuting Jia, Rongpei Shi, Liang Zhang, Ting Wang, Decoding non-equilibrium solidification pathways for crack-suppressive microstructures in additively manufactured Al-Zn-Mg-Cu alloys, Materials & Design, 260; 115153, 2025. doi.org/10.1016/j.matdes.2025.115153

212-25 Ruosong Hou, Zhe Jiang, Jianhao Chen, Fei Sui, Mingyang Zhang, Tingting Liu, Xuepeng Ren, Zunyue Yu, Yanjun Pang, Shubin Ren, Chaofang Dong, Xuanhui Qu, Enhancing thermal stability and medium-temperature mechanical properties of laser powder bed fusion AlSi12 alloy by in-situ synthesized TiB2 and Al3Ti, Materials Characterization, 230.B; 115782, 2025. doi.org/10.1016/j.matchar.2025.115782

209-25 Yuancai Li, Deqiao Xie, Weiping Deng, Zongjun Tian, Jianfeng Zhao, Guidian Ma, Surface remelting effect on overhanging region surface roughness of thin-walled Inconel 718 fabricated by laser powder bed fusion, Nondestructive Testing and Evaluation, pp. 1-27, 2025. doi.org/10.1080/10589759.2025.2580413

208-25 Zihan li, Fang Li, Zhengxian Li, Yilin Chen, Danqi Zhang, Kanglong Wu, Chen Shen, Xueming Hua, Suppression of δ-ferrite in the laser welding of Al-Si coated press-hardened steel via tailoring coating thickness, Materials Today Communications, 49; 114241, 2025. doi.org/10.1016/j.mtcomm.2025.114241

207-25 Lova Checkik, Mohammad Sattari, Gert-willem R.B.E. Römer, Michael Schmidt, Improved laser beam shapes for DED-LB/M: low-fidelity Monte-Carlo design and high-fidelity verification, Additive Manufacturing, 113; 105016, 2025. doi.org/10.1016/j.addma.2025.105016

204-25 Mingyu Chung, Kang-Hyun Lee, Jaeeun Park, Yoon Sun Lee, Gun Jin Yun, A fully computational approach for the prediction of melt pool generation of the directed energy deposition process, Journal of Mechanical Science and Technology, 39; pp. 6847-6862, 2025. doi.org/10.1007/s12206-025-1029-0

201-25 Sukunya Pathompakawant, Pruet Kowitwarangkul, Patiparn Ninpetch, Somboon Otarawanna, Effects of pulsed laser repitition rate and duty cycle on heat-affected zone narrowing in laser powder bed fusion of 316L stainless steel, Applied Science and Engineering Progress, 18.4; 7709, 2025. doi.org/10.14416/j.asep.2025.03.007

200-25 Zhenhao Han, Jiajing Pan, Zhou An, Kun Lu, Yongpeng Fan, Jiyuan Wang, Muhan Zou, Zifu Wang, Effects of NbC and Mo on plasma-cladded FeCoCrNiMn high-entropy alloy coatings: Experimental and simulation study, Surface and Coatings Technology, 517; 132822, 2025. doi.org/10.1016/j.surfcoat.2025.132822

195-25 Dengzhi Yao, Shaoyang Zhao, Ming Wei, Guangyu Yang, Bang Xiao, Jian Wang, Effects of plasma rotating electrode process parameters on the particle size of Ta-10W alloy powder, JOM, 2025. doi.org/10.1007/s11837-025-07838-6

193-25 M. Mohsin Raza, Yu-Lung Lo, Temperature gradient and shear strength in nanosecond laser welding of silicon carbide and copper, Journal of Materials Research and Technology, 39; pp. 3033-3049, 2025. doi.org/10.1016/j.jmrt.2025.10.034

189-25 M. Mohsin Raza, Yu-Lung Lo, Nanosecond laser welding for copper to silicon carbide lap joints with optimized parameters, Results in Engineering, 28, 107511, 2025. doi.org/10.1016/j.rineng.2025.107511

184-25 Xiangyu Li, Yufan Zhao, Yiqi Peng, Shuoqing Shi, Kunyu Liu, Guangyao Xu, Yuchao Lei, Nannan Lu, Hao Wang, Xin Lin, Bulk single-crystal-like IN738 alloy fabricated using laser powder bed fusion by controlling the thermal flow, Materials Research Letters, 13.10; pp. 1072-1079, 2025. doi.org/10.1080/21663831.2025.2563357

181-25 Yingjie Yang , Haibin Tang, Jie Gao , Shuxiang Zhang, Tingting Liu, Understanding the multi-scan strategies in L-PBFed CF/PEEK composites: micro–macro tests and multi-scale modelling, Virtual and Physical Prototyping, 2025. doi.org/10.1080/17452759.2025.2565475

176-25 Dingmeng Xu, Wuxin Yang, Ming Yan, Malaya Prasad Behera, Sarat Singamneni, Michael A. Hodgson, Yafeng Yang, Katsuyoshi Kondoh, Peng Cao, Unlocking strength-ductility synergy in laser additive manufacturing of Ti-Cu alloys via core-shell feedstock design, Materials Science and Engineering: A, 946; 149138, 2025. doi.org/10.1016/j.msea.2025.149138

175-25 Mahyar Khorasani, Jordan Noronha, David Downing, Elmira Sharabian, Jason Rogers, Amirhossein Ghasemi, Ian Gibson, Bernard Rolfe, Ola Harrysson, Milan Brandt, Stuart Bateman, Martin Leary, A conclusive model to predict PBF-LB of AlSi10Mg thin-walled structures: digitally reconstructed models guided by both artificial neural networks and computational fluid dynamics, Progress in Additive Manufacturing, 10; pp. 11801-11826, 2025. doi.org/10.1007/s40964-025-01317-9

173-25 Samuele Piandoro, Caterina Angeloni, Alessandro Fortunato, Erica Liverani, Alessandro Ascari, Numerical modeling of high-speed laser cutting of copper current collectors, Materials Research Proceedings, 57; pp. 319-326, 2025. doi.org/10.21741/9781644903735-37

171-25 Sang-Hyun Ahn, Inyoung Song, Junsung Bae, Gwang-Ho Jeong, Dae-Won Cho, Young Whan Park, A novel heat source model for welding and additive manufacturing: The traveling steady pool approach, Journal of Manufacturing Processes, 153; pp. 471-486, 2025. doi.org/10.1016/j.jmapro.2025.09.012

165-25 Alessio Pricci, Gianluca Percoco, Silicone 3D printing: Experimental validation of a reduced-order numerical model for optimal layer deposition, Materials Research Proceedings, 57; pp. 180-189, 2025. doi.org/10.21741/9781644903735-21

159-25 Xin Lin, Xun Li, Yan Zhou, Yuanyuan Li, Sunming Chen, Kunpeng Zhu, Multiscale investigation of precipitate-dislocation interactions in additive manufacturing: a coupled phase-field and thermal stress dynamics approach, Virtual and Physical Prototyping, 20.1; e2544759, 2025. doi.org/10.1080/17452759.2025.2544759

156-25 Kyubok Lee, Integrating process-structure-property analysis in laser welding of aluminum and copper via multi-scale and data-driven methods, Thesis, The Pennsylvania State University, 2025.

154-25 Ruosong Hou, Fei Sui, Jianhao Chen, Shuoyu Ma, Jialong Chen, Yanjun Pang, Xinlei Zhang, Xuepeng Ren, Zunyue Yu, Shubin Ren, Chaofang Dong, Mingyang Zhang, Effect of substrate preheating temperature on the microstructure and mechanical properties of laser powder bed fusion AlSi12 alloy, Materials Characterization, 229.A; 115512, 2025. doi.org/10.1016/j.matchar.2025.115512

152-25 Abdul Qadeer, Aazim Shafi Lone, Syed Sohail Akhtar, Abul Fazal M. Arif, Abba A Abubakar, Ahmed Jawad Qureshi, Prediction and control of structured porosity in laser powder bed fusion (LPBF) additive manufacturing using multi-scale modeling, Materials & Design, 258; 114627, 2025. doi.org/10.1016/j.matdes.2025.114627

150-25 Patiparn Ninpetch, Pruet Kowitwarangkul, Prasert Chalermkarnnon, Kavin Karunratanakul, Kornrawee Munpakdee, Phadungsak Rattanadecho, Formation and shrinkage of deposited track with varying powder layer thicknesses in selective laser melting process: multi-physics simulation, Computational Particle Mechanics, 12; pp. 3619-3632. doi.org/10.1007/s40571-025-01043-7

148-25 Jiasen Han, Shuhao Wang, Wenjun Ge, Hui Chen, Yajing Sun, Yuxiang Ai, Weihao Yuan, Siyuan Ruan, Weiming Niu, Haiou Yang, Shuo Yin, Wentao Yan, Xin Lin, Non-contact ultrasound to assist laser additive manufacturing, Nature Communications, 16; 7613, 2025. doi.org/10.1038/s41467-025-62803-w

138-25 Haichuan Shi, Yang Chu, Peilei Zhang, Zhishui Yu, Hua Yan, Qinghua Lu, Effects of selective laser melting process parameters on the fatigue strength and material characteristics of tungsten carbide/inconel 718 composites, Intermetallics, 185; 108928, 2025. doi.org/10.1016/j.intermet.2025.108928

131-25 Aparna Chandramouli, Experimental and computational analysis of laser sintered three-dimensional wick structures for thermal management applications, Thesis, Wichita State University, 2025.

128-25 Asif Ur Rehman, Alexandre Pierre, Gregory Gibbons, Viktor Mechtcherine, Droplet impact mapping in binder jetting of OPC concrete: Numerical modelling on a DEM powder bed, Powder Technology, 465; 121328, 2025. doi.org/10.1016/j.powtec.2025.121328

119-25 Qiyuan Han, Tian Chen, Tiancheng Liu, The study of laser cladding of stellite6 particles on 316 I alloy process, Journal of Physics: Conference Series, 3033; 012005, 2025. doi.org/10.1088/1742-6596/3033/1/012005

118-25 J. Dakka, H.P. Wang, B. Yang, J. Ma, B. Carlson, J. Oswald, Influence of beam oscillation on keyhole stability and porosity in aluminum laser welding, Journal of Materials Processing Technology, 342; 118945. doi.org/10.1016/j.jmatprotec.2025.118945

116-25 Yunhe Zhou, Yuchao Lei, Kenta Yamanaka, Yunping Li, Hao Wang, Hao Chen, Akihiko Chiba, Understanding the potential of solute trapping induced by rapid solidification in powder bed fusion additive manufacturing, Journal of Materials Processing Technology, 342; 118939, 2025. doi.org/10.1016/j.jmatprotec.2025.118939

110-25 Lixin Wang, Xinyu Jiang, Guang Yang, Shiyun Dong, Shixing Yan, Simulation and experiment of laser cladding layer for repairing brake disc in heavy-duty vehicles, Royal Society Open Science, 12.6; 241980, 2025. doi.org/10.1098/rsos.241980

107-25 John-Baptist Mugisha Kauzya, Print-based manufacturing of structures and electronics for challenging environments, Thesis, University of Colorado Boulder, 2025.

105-25 Anuj Kumar, Mukul Shukla, Keyhole induced porosity evolution for Inconel 718 alloy in laser powder bed fusion: A computational fluid dynamics approach, Recent Advances in Additive Manufacturing, Volume 2 (ICAM 2024), pp. 191-202, 2025. doi.org/10.1007/978-981-96-3165-0_15

104-25 Yabao Hu, Hanning Chen, Yelin Xia, Jiaxing Song, Zhao Zhang, Jianbo Lei, Dynamic thermal behavior during laser powder bed fusion of medical pure titanium: Numerical simulation and experimental study, Materials Today Communications, 46; 112906, 2025. doi.org/10.1016/j.mtcomm.2025.112906

102-25 Min-Gyu Chung, Jae-Eun Park, Kang-Hyun Lee, Gun Jin Yun, Predicting reinforcing particle distribution in melt pool during direct energy deposition (DED) MMC additive manufacturing process, Composites Research, 38.2; pp. 114-122, 2025. doi.org/10.7234/composres.2025.38.2.114

100-25 Lin Gao, Yan Chen, Xuan Zhang, Sean R. Agnew, Andrew C. Chuang, Tao Sun, Evolution of dislocations during the rapid solidification in additive manufacturing, Nature Communications, 16; 4696, 2025. doi.org/10.1038/s41467-025-59988-5

91-25 Samuele Piandoro, Alessandro Fortunato, Erica Liverani, Alessandro Ascari, Numerical investigation of pulsed welding on aluminum alloy with a dual-region laser source: Exploring non-equal pulse parameters, Materials Research Proceedings, 54; pp. 2130-2140, 2025. doi.org/10.21741/9781644903599-229

81-25 Deepak Mudakavi, Rakshith B. Sreesha, Siddarth Adappa, Somashekara M. Adinarayanappa, A study on the effect of deposition strategies on the resulting residual stress during laser powder directed energy deposition, Transactions of the Indian Institute of Metals, 78; 124, 2025. doi.org/10.1007/s12666-025-03583-1

78-25 Daiji Morita, Nobuyuki Sumi, Takeshi Sakata, Shigeru Takushima, Toshiya Matozaki, Takashi Yuzawa, High-quality and high-resolution thin-wall fabrication of A5183 aluminum alloy using wire-laser metal 3D printer, The International Journal of Advanced Manufacturing Technology, 137; pp. 5983-6002, 2025. doi.org/10.1007/s00170-025-15530-x

76-25 Caterina Angeloni, Samuele Piandoro, Erica Liverani, Alessandro Fortunato, Numerical and experimental study of high-speed laser cutting of copper current collectors: Process optimization for quality assessment, Advanced Materials Technologies, 2401905, 2025. doi.org/10.1002/admt.202401905

72-25 Chan Kyu Kim, Gitae Park, Dae Won Cho, Chang-young Oh, Dong-jin Oh, Seolbin Jeong, Young Tae Cho, Seok Kim, Bo Wook Seo, Chang Jong Kim, Sang Woo Song, 3D weaving path optimization for enhanced surface quality in wire arc-based directed energy deposition, Journal of Materials Processing Technology, 340; 118838, 2025. doi.org/10.1016/j.jmatprotec.2025.118838

71-25 Yue Zhou, Amir Shakibi, Manikanta Grandi, Zhichao Liu, Fuda Ning, Wire-influenced particle dynamics and fluid flow behaviors of melt pool in coaxial wire-powder fed directed energy deposition of metal matrix composites, Journal of Materials Research and Technology, 36; pp. 2909-2924, 2025. doi.org/10.1016/j.jmrt.2025.04.015

68-25 Tiangiu Xu, Davide Concordia, Francesco Galbusera, Ali Gokhan Demir, Development of a mid-fidelity modelling approach for laser welding with novel beam shapes for electric mobility materials, Journal of Manufacturing Processes, 151; pp. 772-787, 2025. doi.org/10.1016/j.jmapro.2025.07.030

67-25 Chang Shu, Siyuan Chen, Peiran Lei, Xuedao Shu, Adel Abdel-Wahab, Khamiss Essa, Effect and mechanism of powder morphology on mechanical properties of nickel-based metal matrix composites TiC-IN738LC in laser powder bed fusion, Progress in Additive Manufacturing, 2025. doi.org/10.1007/s40964-025-01075-8

66-25 Xiang Wang, Rui-Hua Qiao, Yu-Ruo Zhang, Jun Ma, Che-Ping Liang, Lin-Jie Zhang, Suck-Joo Na, Study on element mixing of titanium-stainless steel dissimilar metal welding pool and its effect on joint properties in nanosecond laser welding, Journal of Materials Processing Technology, 340; 118836, 2025. doi.org/10.1016/j.jmatprotec.2025.118836

56-25 Akash Meena, Andreas Andersson Lassila, Dan Lonn, Kent Salomonsson, Wei Wang, Chris Valentin Nielsen, Mohamad Bayat, The effect of laser off-axis angle on the formation of porosities, fluid flow and keyhole formation of an aluminum alloy (AA1050) in the laser welding process, Optics & Laser Technology, 184; 112534, 2025. doi.org/10.1016/j.optlastec.2025.112534

52-25 Shuhei Mino, Masayuki Okugawa, Takayoshi Nakano, Yuichiro Koizumi, Raking and fusing behaviors during fabrication of multiple-layers in powder bed fusion: An integrated discrete element and computational thermal fluid dynamics study, Journal of the Japan Society of Powder and Powder Metallurgy, 72; S1465-S1469. doi.org/10.2497/jjspm.16P-T6-11

40-25 Kangwei Chen, Bryan Lim, Leon Zhang, Boon Xuan Koo, Simon P. Ringer, Keita Nomoto, Formation mechanisms of Sn-rich δ phase and its role in strengthening Cu-10Sn manufactured by laser powder bed fusion, Additive Manufacturing, 102; 104723, 2025. doi.org/10.1016/j.addma.2025.104723

31-25 Alessio Pricci, Gianluca Percoco, Towards a digital twin of extrusion-based additive manufacturing: an experimentally validated numerical model of ironing process, Progress in Additive Manufacturing, 2025. doi.org/10.1007/s40964-025-00988-8

25-25 Venkat Vivek Pamarthi, Tianshu Sun, Abhishek Das, Qamar Hayat, Alexander Griffiths, Lewis Johnson, Pasquale Franciosa, Tailing and axisymmetric static laser beam shapes to steer microstructure and improve mechanical properties of autogenously laser welded AA6082 alloy, Materials & Design, 250; 113619, 2025. doi.org/10.1016/j.matdes.2025.113619

18-25 Rahil Samani, Ignacio Galiano Zurbriggen, Ruoyu Hou, Juncheng Lu, Andrew M. Knight, Comprehensive system-level thermal performance and power density optimization in enclosed natural convection PFC-LLC GaN converters, IEEE Transactions on Industry Applications, 61.2; pp. 3371-3383, 2025. doi.org/10.1109/TIA.2025.3532230

17-25 Yongqi Yang, Guoqiang Huang, Bo Li, Fanqiang Meng, Lin Zhao, Xiaomei Feng, Yifu Shen, Effects of molten pool flow on dispersion of reinforcement particles during laser powder bed fusion of TiC/Ti6Al4V composite, Progress in Additive Manufacturing, 2025. doi.org/10.1007/s40964-025-00954-4

16-25 Ganhua Liu, Baozhu Xie, Zhipeng Zhu, Xuehua Wu, Youwen Yang, Mesoscale numerical simulation and experimental study on the selective laser melting process of 17-4PH stainless steel, Journal of Materials Research and Technology, 35; pp. 2443-2457, 2025. doi.org/10.1016/j.jmrt.2025.01.144

15-25 Asif Ur Rehman, Kashif Azher, Aqsa Rehman, Mussadiq Shah, Muhammad Arif Mahmood, Celal Sami Tüfekci, Metin Uymaz Salamci, Additive manufacturing of Ti6Al4V using directed energy deposition: An elaborative approach of process modelling via computational fluid dynamics, Lasers in Manufacturing and Materials Processing, 12; pp. 201-225, 2025. doi.org/10.1007/s40516-025-00277-w

10-25 Andreas Andersson Lassila, Erik Lundell, Tobias Andersson, Dan Lönn, Kent Salomonsson, Rohollah Ghasemi, Experimental and numerical investigation of process-induced recoil force in keyhole laser welding: Insights for validating multi-physics process simulations and modelling assumptions, Journal of Materials Processing Technology, 341; 118895, 2025. doi.org/10.1016/j.jmatprotec.2025.118895

8-25 Kaikai Xu, Yadonog Gong, Qiang Zhao, Guiru Meng, Meng Zhao, Microscale investigation of molten pool flow and microstructure evolution of Inconel718 alloy during solid-liquid transition, Journal of Manufacturing Processes, 134; pp. 482-493, 2025. doi.org/10.1016/j.jmapro.2024.12.046

7-25 Lei Shi, Xiaohui Lyu, Ji Chen, Chuansong Wu, Ashish Kumar, Ming Zhai, Wenjian Ren, Multi-scale simulation of thermal processes and microstructure evolution in wire arc additive manufacturing of 921A steel, Materials and Solidification, 2025. doi.org/10.26599/MAS.2025.9580003

2-25 Jiandong Yuan, Qilin Guo, Samuel J. Clark, Luis I. Escano, Ali Nabaa, Minglei Qu, Junye Huang, Qingyuan Li, Allen Jonathan Román, Tim A. Osswald, Kamel Fezzaa, Lianyi Chen, Revealing mechanisms of processing defect mitigation in laser powder bed fusion via shaped beams using high-speed X-ray imaging, International Journal of Machine Tools and Manufacture, 204; 104232, 2025. doi.org/10.1016/j.ijmachtools.2024.104232

1-25 Gangxian Zhu, Lele Zhao, Jiaqin Luo, Jiaqiang Li, Xing Zhang, Numerical simulation and experimental research of molten pool flow field and temperature field by hollow-laser direct energy deposition, Optics & Laser Technology, 181.A; 111732, 2025. doi.org/10.1016/j.optlastec.2024.111732

218-24 Abdul Qadeer, S. Sohail Akhtar, Abba A. Abubakar, Abul Fazal M. Arif, Samir Mekid, Khaled S. Al-Athel, Multi-physics modeling of continuous and pulsed lasers: Impact on thermal history and surface properties in powder bed fusion additive manufacturing, Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), 2024. doi.org/10.1115/IMECE2024-145581

217-24 Kai Zhao, Mingzhi Chen, Zhandong Wang, Rui Li, Zhiyuan Jia, Huifang Lan, Guifang Sun, Investigation of thermal and fluid dynamics behaviors of melt pool during laser direct metal deposition on inclined substrates, Materials Today Communications, 41; 110953, 2024. doi.org/10.1016/j.mtcomm.2024.110953

216-24 Andreas Andersson Lassila, Tobias Andersson, Rohollah Ghasemi, Dan Lönn, Enhancement of joint quality for laser welded dissimilar material cell-to-busbar joints using meta model-based multi-objective optimization, Journal of Advanced Joining Processes, 10; 100261, 2024. doi.org/10.1016/j.jajp.2024.100261

210-24 Emmanuel K. Bamido, Michael Cullinan, Evaluation of sources and effects of process dynamics in directed energy deposition, Proceedings of the 35th Annual International Solid Freeform Fabrication Symposium, 2024. doi.org/10.26153/tsw/58121

208-24 Tyler Paupst, Paromita Nath, Physics-based modeling of polymer-metal composites in fused filament fabrication, Proceedings of the 35th Annual International Solid Freeform Fabrication Symposium, 2024. doi.org/10.26153/tsw/58132

192-24 Jieguang Huang, Qian Wang, Jingru Zhang, Lehua Qi, Jun Luo, Migration dynamics of molten droplets impacting on vertical solid surfaces, Physics of Fluids, 36; 122116, 2024. doi.org/10.1063/5.0243314

187-24 Christopher Jasien, Microstructure and processing links in beta-titanium during additive manufacturing, Thesis, Colorado School of Mines, 2024.

185-24 Bowen Ma, Yuping Zhang, Jiayin Li, Dongxu Chen, Yuchan Jiang, Dongdong Li, Mechanism of shape memory effect alteration in Ni50.4Ti49.6 via laser powder bed fusion from the perspective of martensitic twin, Virtual and Physical Prototyping, 19.1; e2428358, 2024. doi.org/10.1080/17452759.2024.2428358

170-24 Rangasayee Kannan, Dean Pierce, Yousub Lee, Jonathan Poplawsky, Kinga Unocic, Christopher Fancher, William Hoffmann, Thomas J. Lienert, Peeyush Nandwana , Controlling microstructure and B2 ordering kinetics in Fe-Al system through additive manufacturing, Journal of Materials Research and Technology, 33; pp. 1692-1703, 2024. doi.org/10.1016/j.jmrt.2024.09.103

168-24 Alexander F. Chadwich, Juan Guillermo Santos Macías, Arash Samaei, Gregory Wagner, Manas V. Upadhyay, Peter W. Voorhees, On microstructure development during laser melting and resolidification: An experimentally validated simulation study, Acta Materialia, 282; 120482, 2024. doi.org/10.1016/j.actamat.2024.120482

161-24 K. Rooney, Y. Dong, A.K. Basak, A. Pramanik, Prediction of mechanical properties of 3D printed particle-reinforced resin composites, Journal of Composites Science, 8.10; 416, 2024. doi.org/10.3390/jcs8100416

149-24 Elmira Sharabian, Mahyar Khorasani, Stefan Gulizia, Amir Hossein Ghasemi, Eric MacDonald, David Downing, Bernard Rolfe, Milan Brandt, Martin Leary, Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper, Rapid Prototyping Journal, 2024. doi.org/10.1108/RPJ-03-2024-0141

141-24 Lingxiao Ouyang, Xinyi Xie, Xiaohong Wang, Jingfeng Wang, Zihong Wang, Le Feng, Hongyun Li, Yunwei Gui, Fusheng Pan, Bimodal structure formation and texture transition mechanism in laser remelted Mg–Al-based alloy, Journal of Materials Research and Technology, 33; pp. 1234-1248, 2024. doi.org/10.1016/j.jmrt.2024.09.156

139-24 Fangxian Zhang, Liping Zhou, Xinliang Xie, Zhenbo Zhang, Qi Chao, Guohua Fan, Crack inhibition and crystallographic texture control in an additively manufactured IN738LC Ni-based superalloy, Journal of Materials Research and Technology, 33; pp. 652-666, 2024. doi.org/10.1016/j.jmrt.2024.09.101

137-24 Dingmeng Xu, Wuxin Yang, Malaya Prasad Behera, Sarat Singamneni, Michael A. Hodgson, Peng Cao, Creating heterostructures via laser powder bed fusion using titanium and stainless steel mixtures, Materials Science and Engineering: A, 915; 147260, 2024. doi.org/10.1016/j.msea.2024.147260

135-24 Jianbin Zhan, Kun Li, Ruijin Ma, Liang Zhu, Jiahui Fang, Huajun Cao, David Z. Zhang, Lawrence E. Murr, Achieving fine tailoring of elastocaloric properties of laser powder bed-fused NiTi alloy via laser beam manipulation, International Journal of Machine Tools and Manufacture, 202; 104210, 2024. doi.org/10.1016/j.ijmachtools.2024.104210

127-24 Dac-Phuc Pham, Hong-Chuong Tran, Optimization of in-situ laser remelting parameters for enhancing mechanical properties of parts produced by laser powder bed fusion process, Optics & Laser Technology, 181.A; 111636, 2024. doi.org/10.1016/j.optlastec.2024.111636

124-24 Sang-Hyun Ahn, Jun Sung Bae, Dae-Won Cho, Young Whan Park, Analysis of melting-to-solidification flow patterns with changes in depositional position during the wire–arc direct energy deposition process, The International Journal of Advanced Manufacturing Technology, 134; pp. 2179-2198, 2024. doi.org/10.1007/s00170-024-14236-w

121-24 Lovejoy Mutswatiwa, Lauren Katch, Nathan John Kizer, Judith Anne Todd, Tao Sun, Samuel James Clark, Kamel Fezzaa, Jordan Lum, David Matthew Stobbe, Griffin Jones, Kenneth Charles Meinert Jr., Andrea Paola Argüelles, Christopher Micheal Kube, High-speed synchrotron X-ray imaging of melt pool dynamics during ultrasonic melt processing of Al6061, Communications Materials, 5; 143, 2024. doi.org/10.1038/s43246-024-00584-3

120-24 Mysore Nagaraja Kishore, Dong Qian, Masakazu Soshi, Wei Li, Conforming mesh modeling of multi-physics effect on residual stress in multi-layer powder bed fusion process, Journal of Manufacturing Processes, 124; pp. 793-804, 2024. doi.org/10.1016/j.jmapro.2024.06.033

113-24 Yusufu Ekubaru, Takuya Nakabayashi, Tomoharu Fujiwara, Behrang Poorganji, Processing windows of Ni625 alloy fabricated using direct energy deposition, Advanced Engineering Materials, 2024. doi.org/10.1002/adem.202400962

111-24 Ruijie Liu, Melt pool dynamic modelling for the titanium-based metal additive manufacturing process, Thesis, The University of Auckland, 2024.

104-24 Ju Wang, Meng Li, Huarong Zhang, Zhe Liu, Xiaodan Li, Dengzhi Yao, Yuhang Wu, Qiong Wu, Xizhong An, Shujun Li, Jian Wang, Xing Zhang , Cumulative effects of powder beds and melted areas on pore defects in electron beam powder bed fusion of tungsten, Powder Technology, 443; 119971, 2024. doi.org/10.1016/j.powtec.2024.119971

100-24 Xuesong Gao, Aryan Aryan, Wei Zhang, Numerical analysis of rotating scans’ effect on surface roughness in laser-powder bed fusion, Journal of Materials Research and Technology, 30; pp. 8671-8682, 2024. doi.org/10.1016/j.jmrt.2024.05.214

95-24 Yongbiao Wang, Yue Zhang, Junjie Jiang, Yang Zhang, Hongyang Cui, Xintian Liu, Yujuan Wu, Cross-scale simulation of macro/microstructure evolution during selective laser melting of Mg–Gd–Y alloy, Metallurgical and Materials Transactions B , 2024. doi.org/10.1007/s11663-024-03104-3

94-24 Yang Chu, Haichuan Shi, Peilei Zhang, Zhishui Yu, Hua Yan, Qinghua Lu, Shijie Song, Kaichang Yu, Simulation-assisted parameter optimization and tribological behavior of graphene reinforced IN718 matrix composite prepared by SLM, Intermetallics, 170; 108307, 2024. doi.org/10.1016/j.intermet.2024.108307

92-24 Ying Wei, Song Han, Shiwei Yu, Ziwei Chen, Ziang Li, Hailong Wang, Wenbo Cheng, Mingzhe An , Parameter impact on 3D concrete printing from single to multi-layer stacking, Automation in Construction, 164; 105449, 2024. doi.org/10.1016/j.autcon.2024.105449

90-24 Chuanbin Du, Yuewei Ai, Yiyuan Wang, Chenglong Ye, The effect mechanism of laser beam defocusing on the surface quality of IN718 alloy prepared by laser powder bed fusion, Powder Technology, 443; 119841, 2024. doi.org/10.1016/j.powtec.2024.119841

88-24 Arash Samaei, Joseph P. Leonor, Zhengtao Gan, Zhongsheng Sang, Xiaoyu Xie, Brian J. Simonds, Wing Kam Liu, Gregory J. Wagner, Benchmark study of melt pool and keyhole dynamics, laser absorptance, and porosity in additive manufacturing of Ti-6Al-4V, Progress in Additive Manufacturing, 2024. doi.org/10.1007/s40964-024-00637-6

83-24 Ao Fu, Zhonghao Xie, Jian Wang, Yuankui Cao, Bingfeng Wang, Jia Li, Qihong Fang, Xiaofeng Li, Bin Liu, Yong Liu, Controlling of cellular substructure and its effect on mechanical properties of FeCoCrNiMo0.2 high entropy alloy fabricated by selective laser melting, Materials Science and Engineering: A, 901; 146547, 2024. doi.org/10.1016/j.msea.2024.146547

82-24 Fatemeh Bodaghi, Mojtaba Movahedi, Suck-Joo Na, Lin-Jie Zhang, Amir Hossein Kokabi, Effect of welding current and speed on solidification cracking susceptibility in gas tungsten arc fillet welding of dissimilar aluminum alloys: Coupling a weld simulation and a cracking criterion, Journal of Materials Research and Technology, 30: pp. 4777-4785, 2024. doi.org/10.1016/j.jmrt.2024.04.195

81-24 Myeonghwan Choi, Dae-Won Cho, Kwang-Hyeon Lee, Seonghoon Yoo, Sangyong Nam, Namhyun Kang, Severe Mn vaporization for partial-penetrated laser keyhole welds of high-manganese cryogenic steel, International Journal of Heat and Mass Transfer, 227; 125567, 2024. doi.org/10.1016/j.ijheatmasstransfer.2024.125567

78-24 An Wang, Qianglong Wei, Zijue Tang, J.P. Oliviera, Chu Lun Alex Leung, Pengyuan Ren, Xiaolin Zhang, Yi Wu, Haowei Wang, Hongze Wang, Effects of hatch spacing on pore segregation and mechanical properties during blue laser directed energy deposition of AlSi10Mg, Additive Manufacturing, 85; 104147, 2024. doi.org/10.1016/j.addma.2024.104147

77-24 Jeongho Yang, Seonghun Ji, Du-Rim Eo, Jongcheon Yoon, Parviz Kahhal, Hyub Lee, Sang Hu Park, Effect of abnormal powder feeding on mechanical properties of fabricated part in directed energy deposition, International Journal of Precision Engineering and Manufacturing – Green Technology, 2024. doi.org/10.1007/s40684-024-00620-0

72-24 Minglei Qu, Jiandong Yuan, Ali Nabaa, Junye Huang, Chihpin Andrew Chuang, Lianyi Chen, Melting and solidification dynamics during laser melting of reaction-based metal matrix composites uncovered by in-situ synchrotron X-ray diffraction, Acta Materialia, 271; 119875, 2024. doi.org/10.1016/j.actamat.2024.119875

71-24 Chenze Li, Manish Jain, Qian Liu, Zhuohan Cao, Michael Ferry, Jamie J. Kruzic, Bernd Gludovatz, Xiaopeng Li, Multi-scale microstructure manipulation of an additively manufactured CoCrNi medium entropy alloy for superior mechanical properties and tunable mechanical anisotropy, Additive Manufacturing, 84; 104104, 2024. doi.org/10.1016/j.addma.2024.104104

68-24 Jialu Wang, Shuaicheng Zhu, Miaojin Jiang, Yunwei Gui, Huadong Fu, Jianxin Xie, Solidification track morphology, residual stress behavior, and microstructure evolution mechanism of FGH96-R nickel-based superalloys during laser powder bed fusion process, Journal of Materials Engineering and Performance, 2024. doi.org/10.1007/s11665-024-09326-5

66-24 Erik Holmen Olofsson, Ashley Dan, Michael Roland, Ninna Halberg Jokil, Rohit Ramachandran, Jesper Henri Hattel, Numerical modeling of fill-level and residence time in starve-fed single-screw extrusion: a dimensionality reduction study from a 3D CFD model to a 2D convection-diffusion model, The International Journal of Advanced Manufacturing Technology, 132; pp. 1111-1125, 2024. doi.org/10.1007/s00170-024-13378-1

64-24 Feipeng An, Linjie Zhang, Wei Ma, Suck Joo Na, Influences of the powder size and process parameters on the quasi-stability of molten pool shape in powder bed fusion-laser beam of molybdenum, Journal of Materials Engineering and Performance, 2024. doi.org/10.1007/s11665-024-09328-3

63-24 Haodong Chen, Xin Lin, Yajing Sun, Shuhao Wang, Kunpeng Zhu, Binbin Dan, Revealing formation mechanism of end of process depression in laser powder bed fusion by multi-physics meso-scale simulation, Virtual and Physical Prototyping, 19.1; e2326599, 2024. doi.org/10.1080/17452759.2024.2326599

57-24 Masayuki Okugawa, Kenji Saito, Haruki Yoshima, Katsuhiko Sawaizumi, Sukeharu Nomoto, Makoto Watanabe, Takayoshi Nakano, Yuichiro Koizumi, Solute segregation in a rapidly solidified Hastelloy-X Ni-based superalloy during laser powder bed fusion investigated by phase-field and computational thermal-fluid dynamics simulations, Additive Manufacturing, 84; 104079, 2024. doi.org/10.1016/j.addma.2024.104079

51-24 Jeongho Yang, Dongseok Kang, Si Mo Yeon, Yong Son, Sang Hu Park, Interval island laser-scanning strategy of Ti–6Al–4V part additively manufactured for anisotropic stress reduction, International Journal of Precision Engineering and Manufacturing, 25; pp. 1087-1099, 2024. doi.org/10.1007/s12541-024-00967-z

50-24 James Lamb, Ruben Ochoa, Adriana Eres-Castellanos, Jonah Klemm-Toole, McLean P. Echlin, Tao Sun, Kamel Fezzaa, Amy Clarke, Tresa M. Pollack, Quantification of melt pool dynamics and microstructure during simulated additive manufacturing, Scripta Materialia, 245; 116036, 2024. doi.org/10.1016/j.scriptamat.2024.116036

41-24 Xiong Zhang, Chunjin Wang, Benny C.F. Cheung, Gaoyang Mi, Chunming Wang, Ultrafast laser ablation of tungsten carbide: Quantification of threshold range and interpretation of feature transition, Journal of the American Ceramic Society, 107.6; pp. 3724-3734, 2024. doi.org/10.1111/jace.19718

38-24 Hao-Ping Yeh, Mohamad Bayat, Amirhossein Arzani, Jesper H. Hattel, Accelerated process parameter selection of polymer-based selective laser sintering via hybrid physics-informed neural network and finite element surrogate modelling, Applied Mathematical Modelling, 130; pp. 693-712, 2024. doi.org/10.1016/j.apm.2024.03.030

34-24 Khalid El Abbaoui, Issam Al Korachi, Mostapha El Jai, Berin Šeta, Md. Tusher Mollah, 3D concrete printing using computational fluid dynamics: Modeling of material extrusion with slip boundaries, Journal of Manufacturing Processes, 118; pp. 448-459, 2024. doi.org/10.1016/j.jmapro.2024.03.042

33-24 Hao Lu, Lida Zhu, Pengsheng Xue, Boling Yan, Yanpeng Hao, Zhichao Yang, Jinsheng Ning, Chuanliang Shi, Hao Wang, Ultrasonic machining response and improvement mechanism for differentiated bio-CoCrMo alloys manufactured by directed energy deposition, Journal of Materials Science & Technology, 193; pp. 226-243, 2024. doi.org/10.1016/j.jmst.2023.12.037

32-24 Yinghang Liu, Zhe Song, Yi Guo, Gaoming Zhu, Yunhao Fan, Huamiao Wang, Wentao Yan, Xiaoqin Zeng, Leyun Wang, Simultaneously enhancing strength and ductility of LPBF Ti alloy via trace Y2O3 nanoparticle addition, Journal of Materials Science & Technology, 191; pp. 146-156, 2024. doi.org/10.1016/j.jmst.2024.01.011

27-24 Zehui Liu, Yiyang Hu, Mingyang Zhang, Wei Zhang, Jun Wang, Wenbo Lei, Chunming Wang, Surface morphology evolution mechanisms of pulse laser polishing mold steel, International Journal of Mechanical Sciences, 269; 109039, 2024. doi.org/10.1016/j.ijmecsci.2024.109039

25-24 Muhammad Arif Mahmood, Kashif Ishfaq, Marwan Khraisheh, Inconel-718 processing windows by directed energy deposition: a framework combining computational fluid dynamics and machine learning models with experimental validation, The International Journal of Advanced Manufacturing Technology, 130; pp. 3997-4011, 2024. doi.org/10.1007/s00170-024-12980-7

24-24   Jinsheng Ning, Lida Zhu, Shuhao Wang, Zhichao Yang, Peihua Xu, Pengsheng Xue, Hao Lu, Miao Yu, Yunhang Zhao, Jiachen Li, Susmita Bose, Amit Bandyopadhyay, Printability disparities in heterogeneous material combinations via laser directed energy deposition: a comparative study, International Journal of Extreme Manufacturing, 6; 025001, 2024. doi.org/10.1088/2631-7990/ad172f

22-24 Zhen Chen, Jie Dai, Laixia Yang, Song Shen, Suli Li, Qidong Xie, Chenyu Xu, Numerical simulation of keyhole-induced pores for TA15 in laser powder bed fusion (L-PBF), Infrared Physics & Technology, 140; 105408, 2024. doi.org/10.1016/j.infrared.2024.105408

18-24   Delong Jia, Dong Zhou, Peng Yi, Chuanwei Zhang, Junru Li, Yankuo Guo, Shengyue Zhang, Yanhui Li, Splat deposition stress formation mechanism of droplets impacting onto texture, International Journal of Mechanical Sciences, 266; 109002, 2024. doi.org/10.1016/j.ijmecsci.2024.109002

11-24   Dae Gune Jung, Ji Young Park, Choong Mo Ryu, Jong Jin Hwang, Seung Jae Moon, Numerical study of laser welding of 270 μm thick silicon-steel sheets for electrical motors, Metals, 14.1; 24, 2024. doi.org/10.3390/met14010024

8-24   Zhifu Yao, Longke Bao, Mujin Yang, Yuechao Chen, Minglin He, Jiang Yi, Xintong Yang, Tao Yang, Yilu Zhao, Cuiping Wang, Zheng Zhong, Shuai Wang, Xingjun Liu, Thermally stabe strong <101> texture in additively manufactured cobalt-based superalloys, Scripta Materialia, 242; 115942, 2024. doi.org/10.1016/j.scriptamat.2023.115942

5-24   Xi Shu, Chunyu Wang, Guoqing Chen, Chunju Wang, Lining Sun, Pre-melted electron beam freeform fabrication additive manufacturing: modeling and numerical simulation, Welding in the World, 68; pp. 163-176, 2024. doi.org/10.1007/s40194-023-01647-8

4-24   Lin Gao, Andrew C. Chuang, Peter Kenesei, Zhongshu Ren, Lilly Balderson, Tao Sun, An operando synchrotron study on the effect of wire melting state on solidification microstructures of Inconel 718 in wire-laser directed energy deposition, International Journal of Machine Tools and Manufacture, 194; 104089, 2024. doi.org/10.1016/j.ijmachtools.2023.104089

3-24 Kunjie Dai, Xing He, Decheng Kong, Chaofang Dong, Multi-physical field simulation to yield defect-free IN718 alloy fabricated by laser powder bed fusion, Materials Letters, 355; 135437, 2024. doi.org/10.1016/j.matlet.2023.135437

1-24 Yukai Chen, Hongtu Xu, Yu Lu, Yin Wang, Shuangyuzhou Wang, Ke Huang, Qi Zhang, Prediction of microstructure for Inconel 718 laser welding process using multi-scale model, Proceedings of the 14th International Conference on the Technology of Plasticity – Current Trends in the Technology of Plasticity, pp. 713-722, 2024. doi.org/10.1007/978-3-031-41341-4_75

248-23 Zhongshu Ren, Lin Gao, Samual J. Clark, Kamel Fezzaa, Pavel Shevchenko, Ann Choi, Wes Everhart, Anthony D. Rollett, Lianyi Chen, Tao Sun, Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion, Science, 379; 6627, 2023. doi.org/10.1126/science.add4667

247-23 Mohamad Bayat, Olga Zinovieva, Federico Ferrari, Can Ayas, Matthijs Langelaar, Jon Spangenberg, Roozbeh Salajeghe, Konstantinos Poulios, Sankhya Mohanty, Ole Sigmund, Jesper Hattel, Holistic computational design within additive manufacturing through topology optimization combined with multiphysics multi-scale materials and process modelling, Progress in Materials Science, 138; 101129, 2023. doi.org/10.1016/j.pmatsci.2023.101129

246-23 Riccardo Tonello, Md. Tusher Mollah, Kenneth Weiss, Jon Spangenberg, Are Strandlie, David Bue Pedersen, Jeppe Revall Frisvad, Influence of the printing direction on the surface appearance in multi-material fused filament fabrication, Computer-Aided Design and Computer Graphics (CAD/Graphics), Proceedings, Eds. Shi-Min Hu, Yiyu Cai, Paul Rosin, pp. 90-107, 2023. doi.org/10.1007/978-981-99-9666-7_7

245-23 Peter S. Cook, Arden Phua, Chris H.J. Davies, Gary W. Delaney, Modelling the influences of powder layer depth and particle morphology on powder bed fusion using a coupled DEM-CFD approach, Powder Technology, 429; 118927, 2023. doi.org/10.1016/j.powtec.2023.118927

235-23   E. Haapa, A. Gopaluni, H. Piili, A. Ganvir, A. Salminen, J. Ottelin, Validation of powder layering simulation via packing density measurement for laser-based powder bed fusion, IOP Conference Series: Materials Science and Engineering, 1296; 012020, 2023. doi.org/10.1088/1757-899X/1296/1/012020

233-23   Austin C. Hayes, Additive manufacturing for wind turbine generators: how safety, hybrid approaches, and advanced cooling come together to create high-power density generators, Thesis, University of Colorado at Boulder, 2023.

231-23   Fabio Giudice, Andrea Sili, Validation of a theoretical model for laser welding thermal field by multi-physics numerical simulation, Metals, 13.12; 2023. doi.org/10.3390/met13122020

227-23   W.E. Alphonso, M. Bayat, J.H. Hattel, Comparison between green and infrared laser in laser powder bed fusion of pure copper through high fidelity numerical modelling at meso-scale, Mathematical Modelling of Weld Phenomena 13: Selected peer reviewed papers from the 13th International Seminar Numerical Analysis of Weldability, Eds. Christof Sommitsch, Norbert Enzinger, Peter Mayr, 2023. doi.org/10.3217/978-3-85125-968-1-02

226-23   M. Bayat, J.H. Hattel, High-fidelity numerical modelling of cold spatter formation during laser powder bed fusion of 316-L stainless steel, Mathematical Modelling of Weld Phenomena 13: Selected peer reviewed papers from the 13th International Seminar Numerical Analysis of Weldability, Eds. Christof Sommitsch, Norbert Enzinger, Peter Mayr, 2023. doi.org/10.3217/978-3-85125-968-1-01

219-23   M. Rangapuram, S. Babalola, J. W. Newkirk, L. N. Bartlett, F. W. Liou, K. Chandrashekhara, Stephen R. Cluff, Multiphysics modeling and experimental validation of high-strength steel in laser powder bed fusion process, Progress in Additive Manufacturing, 2023. doi.org/10.1007/s40964-023-00532-6

217-23   Zhiyong Li, Xinfeng Kan, Yanjun Yin, Impact of sulfur content on thermo-capillarity and melt pool dynamics in laser powder bed fusion of 316L powders, Materials Research Express, 10.12; 126502, 2023. doi.org/10.1088/2053-1591/ad0dd0

216-23   B. Fotovvati, S. Shrestha, N. Ferreri, N. Duanmu, Experimental and computational study of Area Printing™ additive manufacturing: Inconel 718 and M300 maraging steel density improvement, Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, 2023.

211-23 Giovanni Chianese, Qamar Hayat, Sharhid Jabar, Pasquale Franciosa, Darek Ceglarek, Stanislao Patalano, A multi-physics CFD study to investigate the impact of laser beam shaping on metal mixing and molten pool dynamics during laser welding of copper to steel for battery terminal-to-casing connections, Journal of Materials Processing Technology, 322; 118202, 2023. doi.org/10.1016/j.jmatprotec.2023.118202

207-23 Dong Liu, Jiaqi Pei, Hua Hou, Xiaofeng Niu, Yuhong Zhao, Optimizing solidification dendrites and process parameters for laser powder bed fusion additive manufacturing of GH3536 superalloy by finite volume and phase-field method, Journal of Materials Research and Technology, 27; pp. 3323-3338, 2023. doi.org/10.1016/j.jmrt.2023.10.188

206-23 Houshang Yin, Jingfan Yang, Ralf D. Fischer, Zilong Zhang, Bart Prorok, Lang Yuan, Xiaoyuan Lou, Pulsed laser additive manufacturing for 316L stainless steel: a new approach to control subgrain cellular structure, JOM, 75; pp. 5027-5036, 2023. doi.org/10.1007/s11837-023-06177-8

205-23 Francis Ogoke, William Lee, Ning-Yu Kao, Alexander Myers, Jack Beuth, Jonathan Malen, Amir Barati Farimani, Convolutional neural networks for melt depth prediction and visualization in laser powder bed fusion, The International Journal of Advanced Manufacturing Technology, 129; pp. 3047-3062, 2023. doi.org/10.1007/s00170-023-12384-z

202-23 Habib Hamed Zargari, Kazuhiro Ito, Abhay Sharma, Effect of workpiece vibration frequency on heat distribution and material flow in the molten pool in tandem-pulsed gas metal arc welding, The International Journal of Advanced Manufacturing Technology, 129; pp. 2507-2522, 2023. doi.org/10.1007/s00170-023-12424-8

199-23 Yukai Chen, Yin Wang, Hao Li, Yu Lu, Bin Han, Qi Zhang, Effects of process parameters on the microstructure of Inconel 718 during powder bed fusion based on cellular automata approach, Virtual and Physical Prototyping, 18.1; e2251032, 2023. doi.org/10.1080/17452759.2023.2251032

197-23 Qiong Wu, Chuang Qiao, Yuhang Wu, Zhe Liu, Xiaodan Li, Ju Wang, Xizhong An, Aijun Huang, Chao Voon Samuel Lim, Numerical investigation on the reuse of recycled powders in powder bed fusion additive manufacturing, Additive Manufacturing, 77; 103821, 2023. doi.org/10.1016/j.addma.2023.103821

196-23 Daicong Zhang, Chunhui Jing, Wei Guo, Yuan Xiao, Jun Luo, Lehua Qi, Microchannels formed using metal microdroplets, Micromachines, 14.10; 1922, 2023. doi.org/10.3390/mi14101922

195-23 Trong-Nhan Le, Santosh Rauniyar, V.H. Nismath, Kevin Chou, An investigation into the effects of contouring process parameters on the up-skin surface characteristics in laser powder-bed fusion process, Manufacturing Letters, 35; Supplement, pp. 707-716, 2023. doi.org/10.1016/j.mfglet.2023.08.085

194-23 Kyubok Lee, Teresa J. Rinker, Masoud M. Pour, Wayne Cai, Wenkang Huang, Wenda Tan, Jennifer Bracey, Jingjing Li, A study on cracks and IMCs in laser welding of Al and Cu, Manufacturing Letters, 35; Supplement, pp. 221-231, 2023. doi.org/10.1016/j.mfglet.2023.08.026

192-23 Kunjie Dai, Xing He, Wei Zhang, Decheng Kong, Rong Guo, Minlei Hu, Ketai He, Chaofang Dong, Tailoring the microstructure and mechanical properties for Hastelloy X alloy by laser powder bed fusion via scanning strategy, Materials & Design, 235; 112386, 2023. doi.org/10.1016/j.matdes.2023.112386

191-23 Jun Du, Daqing Wang, Jimiao He, Yongheng Zhang, Zhike Peng, Influence of droplet size and ejection frequency on molten pool dynamics and deposition morphology in TIG-aided droplet deposition manufacturing, International Communications in Heat and Mass Transfer, 148; 107075, 2023. doi.org/10.1016/j.icheatmasstransfer.2023.107075

188-23 Jin-Hyeong Park, Du-Song Kim, Dae-Won Cho, Jaewoong Kim, Changmin Pyo, Influence of thermal flow and predicting phase transformation on various welding positions, Heat and Mass Transfer, 2023. doi.org/10.1007/s00231-023-03429-w

184-23 Lin Gao, Jishnu Bhattacharyya, Wenhao Lin, Zhongshu Ren, Andrew C. Chuang, Pavel D. Shevchenko, Viktor Nikitin, Ji Ma, Sean R. Agnew, Tao Sun, Tailoring material microstructure and property in wire-laser directed energy deposition through a wiggle deposition strategy, Additive Manufacturing, 77; 103801, 2023. doi.org/10.1016/j.addma.2023.103801

182-23 Liping Guo, Hanjie Liu, Hongze Wang, Qianglong Wei, Jiahui Zhang, Yingyan Chen, Chu Lun Alex Leung, Qing Lian, Yi Wu, Yu Zou, Haowei Wang, A high-fidelity comprehensive framework for the additive manufacturing printability assessment, Journal of Manufacturing Processes, 105; pp. 219-231, 2023. doi.org/10.1016/j.jmapro.2023.09.041

172-23 Liping Guo, Hanjie Liu, Hongze Wang, Qianglong Wei, Yakai Xiao, Zijue Tang, Yi Wu, Haowei Wang, Identifying the keyhole stability and pore formation mechanisms in laser powder bed fusion additive manufacturing, Journal of Materials Processing Technology, 321; 118153, 2023. doi.org/10.1016/j.jmatprotec.2023.118153

171-23 Yuhang Wu, Qiong Wu, Meng Li, Ju Wang, Dengzhi Yao, Hao Luo, Xizhong An, Haitao Fu, Hao Zhang, Xiaohong Yang, Qingchuan Zou, Shujun Li, Haibin Ji, Xing Zhang, Numerical investigation on effects of operating conditions and final dimension predictions in laser powder bed fusion of molybdenum, Additive Manufacturing, 76; 103783, 2023. doi.org/10.1016/j.addma.2023.103783

158-23 K. El Abbaoui, I. Al Korachi, M.T. Mollah, J. Spangenberg, Numerical modelling of planned corner deposition in 3D concrete printing, Archives of Materials Science and Engineering, 121.2; pp. 71-79, 2023. doi.org/10.5604/01.3001.0053.8488

156-23 Liping Guo, Hanjie Liu, Hongze Wang, Valentino A.M. Cristino, C.T. Kwok, Qianglong Wei, Zijue Tang, Yi Wu, Haowei Wang, Deepening the scientific understanding of different phenomenology in laser powder bed fusion by an integrated framework, International Journal of Heat and Mass Transfer, 216; 124596, 2023. doi.org/10.1016/j.ijheatmasstransfer.2023.124596

154-23 Zhiyong Li, Xiuli He, Shaoxia Li, Xinfeng Kan, Yanjun Yin, Gang Yu, Sulfur-induced transitions of thermal behavior and flow dynamics in laser powder bed fusion of 316L powders, Thermal Science and Engineering Progress, 45; 102072, 2023. doi.org/10.1016/j.tsep.2023.102072

149-23 Shardul Kamat, Wayne Cai, Teresa J. Rinker, Jennifer Bracey, Liang Xi, Wenda Tan, A novel integrated process-performance model for laser welding of multi-layer battery foils and tabs, Journal of Materials Processing Technology, 320; 118121, 2023. doi.org/10.1016/j.jmatprotec.2023.118121

148-23 Reza Ghomashchi, Shahrooz Nafisi, Solidification of Al12Si melt pool in laser powder bed fusion, Journal of Materials En gineering and Performance, 2023. doi.org/10.1007/s11665-023-08502-3

133-23 Hesam Moghadasi, Md Tusher Mollah, Deepak Marla, Hamid Saffari, Jon Spangenberg, Computational fluid dynamics modeling of top-down digital light processing additive manufacturing, Polymers, 15.11; 2459, 2023. doi.org/10.3390/polym15112459

131-23 Luca Santoro, Raffaella Sesana, Rosario Molica Nardo, Francesca Curà, In line defect detection in steel welding process by means of thermography, Experimental Mechanics in Engineering and Biomechanics – Proceedings ICEM20, 19981, 2023.

128-23 Md Tusher Mollah, Raphaël Comminal, Wilson Ricardo Leal da Silva, Berin Šeta, Jon Spangenberg, Computational fluid dynamics modelling and experimental analysis of reinforcement bar integration in 3D concrete printing, Cement and Concrete Research, 173; 107263, 2023. doi.org/10.1016/j.cemconres.2023.107263

123-23 Arash Samaei, Zhongsheng Sang, Jennifer A. Glerum, Jon-Erik Mogonye, Gregory J. Wagner, Multiphysics modeling of mixing and material transport in additive manufacturing with multicomponent powder beds, Additive Manufacturing, 67; 103481, 2023. doi.org/10.1016/j.addma.2023.103481

122-23 Chu Han, Ping Jiang, Shaoning Geng, Lingyu Guo, Kun Liu, Inhomogeneous microstructure distribution and its formation mechanism in deep penetration laser welding of medium-thick aluminum-lithium alloy plates, Optics & Laser Technology, 167; 109783, 2023. doi.org/10.1016/j.optlastec.2023.109783

111-23 Alexander J. Myers, Guadalupe Quirarte, Francis Ogoke, Brandon M. Lane, Syed Zia Uddin, Amir Barati Farimani, Jack L. Beuth, Jonathan A. Malen, High-resolution melt pool thermal imaging for metals additive manufacturing using the two-color method with a color camera, Additive Manufacturing, 73; 103663, 2023. doi.org/10.1016/j.addma.2023.103663

107-23 M. Mohsin Raza, Yu-Lung Lo, Hua-Bin Lee, Chang Yu-Tsung, Computational modeling of laser welding for aluminum–copper joints using a circular strategy, Journal of Materials Research and Technology, 25; pp. 3350-3364, 2023. doi.org/10.1016/j.jmrt.2023.06.122

106-23 H.Z. Lu, L.H. Liu, X. Luo, H.W. Ma, W.S. Cai, R. Lupoi, S. Yin, C. Yang, Formation mechanism of heterogeneous microstructures and shape memory effect in NiTi shape memory alloy fabricated via laser powder bed fusion, Materials & Design, 232; 112107, 2023. doi.org/10.1016/j.matdes.2023.112107

105-23 Harun Kahya, Hakan Gurun, Gokhan Kucukturk, Experimental and analytical investigation of the re-melting effect in the manufacturing of 316L by direct energy deposition (DED) method, Metals, 13.6; 1144, 2023. doi.org/10.3390/met13061144

100-23 Dongju Chen, Gang Li, Peng Wang, Zhiqiang Zeng, Yuhang Tang, Numerical simulation of melt pool size and flow evolution for laser powder bed fusion of powder grade Ti6Al4V, Finite Elements in Analysis and Design, 223; 103971, 2023. doi.org/10.1016/j.finel.2023.103971

97-23 Mahyar Khorasani, Martin Leary, David Downing, Jason Rogers, Amirhossein Ghasemi, Ian Gibson, Simon Brudler, Bernard Rolfe, Milan Brandt, Stuart Bateman, Numerical and experimental investigations on manufacturability of Al–Si–10Mg thin wall structures made by LB-PBF, Thin-Walled Structures, 188; 110814, 2023. doi.org/10.1016/j.tws.2023.110814

95-23 M.S. Serdeczny, Laser welding of dissimilar materials – simulation driven optimization of process parameters, IOP Conference Series: Materials Science and Engineering, 1281; 012018, 2023. doi.org/10.1088/1757-899X/1281/1/012018

90-23 Lin Liu, Tubin Liu, Xi Dong, Min Huang, Fusheng Cao, Mingli Qin, Numerical simulation of thermal dynamic behavior and morphology evolution of the molten pool of selective laser melting BN/316L stainless steel composite, Journal of Materials Engineering and Performance, 2023. doi.org/10.1007/s11665-023-08210-y

89-23 M. P. Serdeczny, A. Jackman, High fidelity modelling of bead geometry in directed energy deposition – simulation driven optimization, Journal of Physics: Conference Series, NOLAMP19, 2023.

88-23 Lu Wang, Shuhao Wang, Yanming Zhang, Wentao Yan, Multi-phase flow simulation of powder streaming in laser-based directed energy deposition, International Journal of Heat and Mass Transfer, 212; 124240, 2023. doi.org/10.1016/j.ijheatmasstransfer.2023.124240

80-23 Mahyar Khorasani, AmirHossein Ghasemi, Martin Leary, David Downing, Ian Gibson, Elmira G. Sharabian, Jithin Kozuthala Veetil, Milan Brandt, Stuart Batement, Bernard Rolfe, Benchmark models for conduction and keyhole modes in laser-based powder bed fusion of Inconel 718, Optics & Laser Technology, 164; 109509, 2023. doi.org/10.1016/j.optlastec.2023.109509

78-23   Md. Tusher Mollah, Raphaël Comminal, Marcin P. Serdeczny, Berin Šeta, Jon Spangenberg, Computational analysis of yield stress buildup and stability of deposited layers in material extrusion additive manufacturing, Additive Manufacturing, 71; 103605, 2023. doi.org/10.1016/j.addma.2023.103605

76-23   Asif Ur Rehman, Kashif Azher, Abid Ullah, Celal Sami Tüfekci, Metin Uymaz Salamci, Binder jetting of SS316L: a computational approach for droplet-powder interaction, Rapid Prototyping Journal, 2023. doi.org/10.1108/RPJ-08-2022-0264

75-23   Dengzhi Yao, Ju Wang, Hao Luo, Yuhang Wu, Xizhong An, Thermal behavior and control during multi-track laser powder bed fusion of 316 L stainless steel, Additive Manufacturing, 70; 103562, 2023. doi.org/10.1016/j.addma.2023.103562

61-23   Yaqing Hou, Hang Su, Hao Zhang, Fafa Li, Xuandong Wang, Yazhou He, Dupeng He, An integrated simulation model towards laser powder bed fusion in-situ alloying technology, Materials & Design, 228; 111795, 2023. doi.org/10.1016/j.matdes.2023.111795

56-23   Maohong Yang, Guiyi Wu, Xiangwei Li, Shuyan Zhang, Honghong Wang, Jiankang Huang, Influence of heat source model on the behavior of laser cladding pool, Journal of Laser Applications, 35.2; 2023. doi.org/10.2351/7.0000963

45-23   Daniel Martinez, Philip King, Santosh Reddy Sama, Jay Sim, Hakan Toykoc, Guha Manogharan, Effect of freezing range on reducing casting defects through 3D sand-printed mold designs, The International Journal of Advanced Manufacturing Technology, 2023. doi.org/10.1007/s00170-023-11112-x

39-23   Peter S. Cook, David J. Ritchie, Determining the laser absorptivity of Ti-6Al-4V during laser powder bed fusion by calibrated melt pool simulation, Optics & Laser Technology, 162; 109247. 2023. doi.org/10.1016/j.optlastec.2023.109247

36-23   Yixuan Chen, Weihao Wang, Yao Ou, Yingna Wu, Zirong Zhai, Rui Yang, Impact of laser power and scanning velocity on microstructure and mechanical properties of Inconel 738LC alloys fabricated by laser powder bed fusion, TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings, pp. 138-149, 2023. doi.org/10.1007/978-3-031-22524-6_15

34-23   Chao Kang, Ikki Ikeda, Motoki Sakaguchi, Recoil and solidification of a paraffin droplet impacted on a metal substrate: Numerical study and experimental verification, Journal of Fluids and Structures, 118; 103839, 2023. doi.org/10.1016/j.jfluidstructs.2023.103839

30-23   Fei Wang, Tiechui Yuan, Ruidi Li, Shiqi Lin, Zhonghao Xie, Lanbo Li, Valentino Cristino, Rong Xu, Bing liu, Comparative study on microstructures and mechanical properties of ultra ductility single-phase Nb40Ti40Ta20 refractory medium entropy alloy by selective laser melting and vacuum arc melting, Journal of Alloys and Compounds, 942; 169065, 2023. doi.org/10.1016/j.jallcom.2023.169065

29-23   Haejin Lee, Yeonghwan Song, Seungkyun Yim, Kenta Aoyagi, Akihiko Chiba, Byoungsoo Lee, Influence of linear energy on side surface roughness in powder bed fusion electron beam melting process: Coupled experimental and simulation study, Powder Technology, 418; 118292, 2023.

27-23   Yinan Chen, Bo Li, Double-phase refractory medium entropy alloy NbMoTi via selective laser melting (SLM) additive manufacturing, Journal of Physics: Conference Series, 2419; 012074, 2023. doi.org/10.1088/1742-6596/2419/1/012074

23-23   Yunwei Gui, Kenta Aoyagi, Akihiko Chiba, Development of macro-defect-free PBF-EB-processed Ti–6Al–4V alloys with superior plasticity using PREP-synthesized powder and machine learning-assisted process optimization, Materials Science and Engineering: A, 864; 144595, 2023. doi.org/10.1016/j.msea.2023.144595

21-23   Tatsuhiko Sakai, Yasuhiro Okamoto, Nozomi Taura, Riku Saito, Akira Okada, Effect of scanning speed on molten metal behaviour under angled irradiation with a continuous-wave laser, Journal of Materials Processing Technology, 313; 117866, 2023. doi.org/10.1016/j.jmatprotec.2023.117866

19-23   Gianna M. Valentino, Arunima Banerjee, Alexander lark, Christopher M. Barr, Seth H. Myers, Ian D. McCue, Influence of laser processing parameters on the density-ductility tradeoff in additively manufactured pure tantalum, Additive Manufacturing Letters, 4; 100117, 2023. doi.org/10.1016/j.addlet.2022.100117

15-23   Runbo Jiang, Zhongshu Ren, Joseph Aroh, Amir Mostafaei, Benjamin Gould, Tao Sun, Anthony D. Rollett, Quantifying equiaxed vs epitaxial solidification in laser melting of CMSX-4 single crystal superalloy, Metallurgical and Materials Transactions A, 54; pp. 808-822, 2023. doi.org/10.1007/s11661-022-06929-2

14-23   Nguyen Thi Tien, Yu-Lung Lo, M. Mohsin Raza, Cheng-Yen Chen, Chi-Pin Chiu, Optimization of processing parameters for pulsed laser welding of dissimilar metal interconnects, Optics & Laser Technology, 159; 109022, 2023. doi.org/10.1016/j.optlastec.2022.109022

9-23 Hou Yi Chia, Wentao Yan, High-fidelity modeling of metal additive manufacturing, Additive Manufacturing Technology: Design, Optimization, and Modeling, Ed. Kun Zhou, 2023.

8-23 Akash Aggarwal, Yung C. Shin, Arvind Kumar, Investigation of the transient coupling between the dynamic laser beam absorptance and the melt pool – vapor depression morphology in laser powder bed fusion process, International Journal of Heat and Mass Transfer, 201.2; 123663, 2023. doi.org/10.1016/j.ijheatmasstransfer.2022.123663

201-22   Maria Beatrice Abrami, Marialaura Tocci, Muhannad Ahmed Obeidi, Dermot Brabazon, Annalisa Pola, Prediction of microstructure for AlSl316L steel from numerical simulation of laser powder bed fusion, Metal and Materials International, 28; pp. 2735-2746, 2022. doi.org/10.1007/s12540-022-01168-x

200-22   Stefano Baroldo, Alessandro Roncoroni, Filippo Palo, Anna Valente, Multi-physics based methodology for evaluating powder feeding quality for laser metal deposition, Procedia CIRP, 107; pp. 623-628, 2022. doi.org/10.1016/j.procir.2022.05.036

199-22 Md. Tusher Mollah, Raphaël Comminal, Marcin P. Serdeczny, David B. Pedersen, Jon Spangenberg, Numerical predictions of bottom layer stability in material extrusion additive manufacturing, JOM, 74; pp. 1096-1101, 2022. doi.org/10.1007/s11837-021-05035-9

198-22 Md. Tusher Mollah, Amirpasha Moetazedian, Andy Gleadall, Jiongyi Yan, Wayne Edgar Alphonso, Raphael Comminal, Berin Seta, Tony Lock, Jon Spangenberg, Investigation on corner precision at different corner angles in material extrusion additive manufacturing: An experimental and computational fluid dynamics analysis, Proceedings of the 33rd Annual Solid Freeform Fabrication Symposium, 2022.

197-22 Md. Tusher Mollah, Marcin P. Serdeczny, Raphaël Comminal, Berin Šeta, Marco Brander, David B. Pedersen, Jon Spangenberg, A numerical investigation of the inter-layer bond and surface roughness during the yield stress buildup in wet-on-wet material extrusion additive manufacturing, ASPE and euspen Summer Topical Meeting, 77, 2022.

182-22   Chan Kyu Kim, Dae-Won Cho, Seok Kim, Sang Woo Song, Kang Myung Seo, Young Tae Cho, High-throughput metal 3D printing pen enabled by a continuous molten droplet transfer, Advanced Science, 2205085, 2022. doi.org/10.1002/advs.202205085

180-22 Xu Kaikai, Gong Yadong, Zhang Qiang, Numerical simulation of dynamic analysis of molten pool in the process of direct energy deposition, The International Journal of Advanced Manufacturing Technology, 2022. doi.org/10.1007/s00170-022-10271-7

179-22 Yasuhiro Okamoto, Nozomi Taura, Akira Okada, Study on laser drilling process of solid metal on its liquid, International Journal of Electrical Machining, 27; 2022. doi.org/10.2526/ijem.27.35

175-22 Lu Min, Xhi Xiaojie, Lu Peipei, Wu Meiping, Forming quality and wettability of surface texture on CuSn10 fabricated by laser powder bed fusion, AIP Advances, 12.12; 125114, 2022. doi.org/10.1063/5.0122076

174-22 Thinus Van Rhijn, Willie Du Preez, Maina Maringa, Dean Kouprianoff, An investigation into the optimization of the selective laser melting process parameters for Ti6Al4V through numerical modelling, JOM, 2022. doi.org/10.1007/s11837-022-05608-2

171-22 Jonathan Yoshioka, Mohsen Eshraghi, Temporal evolution of temperature gradient and solidification rate in laser powder bed fusion additive manufacturing, Heat and Mass Transfer, 2022. doi.org/10.1007/s00231-022-03318-8

170-22 Subin Shrestha and Kevin Chou, Residual heat effect on the melt pool geometry during the laser powder bed fusion process, Journal of Manufacturing and Materials Processing, 6.6; 153, 2022. doi.org/10.3390/jmmp6060153

169-22 Aryan Aryan, Obinna Chukwubuzo, Desmond Bourgeois, Wei Zhang, Hardness prediction by incorporating heat transfer and molten pool fluid flow in a mult-pass, multi-layer weld for onsite repair of Grade 91 steel, U.S. Department of Energy Office of Scientific and Technical Information, DOE-OSU-0032067, 2022. doi.org/10.2172/1898594

158-22 Dafan Du, Lu Wang, Anping Dong, Wentao Yan, Guoliang Zhu, Baode Sun, Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion, International Journal of Machine Tools and Manufacture, 183; 103965, 2022. doi.org/10.1016/j.ijmachtools.2022.103965

157-22 Han Chu, Jiang Ping, Geng Shaoning, Liu Kun, Nucleation mechanism in oscillating laser welds of 2024 aluminium alloy: A combined experimental and numerical study, Optics & Laser Technology, 158.A; 108812, 2022. doi.org/10.1016/j.optlastec.2022.108812

153-22 Zixiang Li, Yinan Cui, Baohua Chang, Guan Liu, Ze Pu, Haoyu Zhang, Zhiyue Liang, Changmeng Liu, Li Wang, Dong Du, Manipulating molten pool in in-situ additive manufacturing of Ti-22Al-25 Nb through alternating dual-electron beams, Additive Manufacturing, 60.A; 103230, 2022. doi.org/10.1016/j.addma.2022.103230

149-22   Qian Chen, Yao Fu, Albert C. To, Multiphysics modeling of particle spattering and induced defect formation mechanism in Inconel 718 laser powder bed fusion, The International Journal of Advanced Manufacturing Technology, 123; pp. 783-791, 2022. doi.org/10.1007/s00170-022-10201-7

148-22   Arden Phua, Peter S. Cook, Chris H.J. Davies, Gary W. Delaney, Powder spreading over realistic laser melted surfaces in metal additive manufacturing, Additive Manufacturing Letters, 3; 100039, 2022. doi.org/10.1016/j.addlet.2022.100039

146-22   Zixuan Wan, Hui-ping Wang, Jingjing Li, Baixuan Yang, Joshua Solomon, Blair Carlson, Effect of welding mode on remote laser stitch welding of zinc-coated steel with different sheet thickness combinations, Journal of Manufacturing Science and Engineering, MANU-21-1598, 2022. doi.org/10.1115/1.4055792

143-22   Du-Rim Eo, Seong-Gyu Chung, JeongHo Yang, Won Tae Cho, Sun-Hong Park, Jung-Wook Cho, Surface modification of high-Mn steel via laser-DED: Microstructural characterization and hot crack susceptibility of clad layer, Materials & Design, 223; 111188, 2022. doi.org/10.1016/j.matdes.2022.111188

142-22   Zichuan Fu, Xiangman Zhou, Bin Luo, Qihua Tian, Numerical simulation study of the effect of weld current on WAAM welding pool dynamic and weld bead morphology, International Conference on Mechanical Design and Simulation, Proceedings, 12261; 122614G, 2022. doi.org/10.1117/12.2639074

132-22   Yiyu Huang, Zhonghao Xie, Wenshu Li, Haoyu Chen, Bin Liu, Bingfeng Wang, Dynamic mechanical properties of the selective laser melting NiCrFeCoMo0.2 high entropy alloy and the microstructure of molten pool, Journal of Alloys and Compounds, 927; 167011, 2022. doi.org/10.1016/j.jallcom.2022.167011

126-22   Jingqi Zhang, Yingang Liu, Gang Sha, Shenbao Jin, Ziyong Hou, Mohamad Bayat, Nan Yang, Qiyang Tan, Yu Yin, Shiyang Liu, Jesper Henri Hattel, Matthew Dargusch, Xiaoxu Huang, Ming-Xing Zhang, Designing against phase and property heterogeneities in additively manufactured titanium alloys, Nature Communications, 13; 4660, 2022. doi.org/10.1038/s41467-022-32446-2

119-22   Xu Kaikai, Gong Yadong, Zhao Qiang, Numerical simulation on molten pool flow of Inconel718 alloy based on VOF during additive manufacturing, Materials Today Communications, 33; 104147, 2022. doi.org/10.1016/j.mtcomm.2022.104147

118-22   AmirPouya Hemmasian, Francis Ogoke, Parand Akbari, Jonathan Malen, Jack Beuth, Amir Barati Farimani, Surrogate modeling of melt pool thermal field using deep learning, SSRN, 2022. doi.org/10.2139/ssrn.4190835

117-22   Chiara Ransenigo, Marialaura Tocci, Filippo Palo, Paola Ginestra, Elisabetta Ceretti, Marcello Gelfi, Annalisa Pola, Evolution of melt pool and porosity during laser powder bed fusion of Ti6Al4V alloy: Numerical modelling and experimental validation, Lasers in Manufacturing and Materials Processing, 2022. doi.org/10.1007/s40516-022-00185-3

112-22   Chris Jasien, Alec Saville, Chandler Gus Becker, Jonah Klemm-Toole, Kamel Fezzaa, Tao Sun, Tresa Pollock, Amy J. Clarke, In situ x-ray radiography and computational modeling to predict grain morphology in β-titanium during simulated additive manufacturing, Metals, 12.7; 1217, 2022. doi.org/10.3390/met12071217

110-22   Haotian Zhou, Haijun Su, Yinuo Guo, Peixin Yang, Yuan Liu, Zhonglin Shen, Di Zhao, Haifang Liu, Taiwen Huang, Min Guo, Jun Zhang, Lin Liu, Hengzhi Fu, Formation and evolution mechanisms of pores in Inconel 718 during selective laser melting: Meso-scale modeling and experimental investigations, Journal of Manufacturing Processes, 81; pp. 202-213, 2022. doi.org/10.1016/j.jmapro.2022.06.072

109-22   Yufan Zhao, Huakang Bian, Hao Wang, Aoyagi Kenta, Yamanaka Kenta, Akihiko Chiba, Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing, Materials & Design, 221; 110915, 2022. doi.org/10.1016/j.matdes.2022.110915

107-22   Dan Lönn, David Spångberg, Study of process parameters in laser beam welding of copper hairpins, Thesis, University of Skövde, 2022.

106-22   Liping Guo, Hongze Wang, Qianglong Wei, Hanjie Liu, An Wang, Yi Wu, Haowei Wang, A comprehensive model to quantify the effects of additional nano-particles on the printability in laser powder bed fusion of aluminum alloy and composite, Additive Manufacturing, 58; 103011, 2022. doi.org/10.1016/j.addma.2022.103011

104-22   Hongjiang Pan, Thomas Dahmen, Mohamad Bayat, Kang Lin, Xiaodan Zhang, Independent effects of laser power and scanning speed on IN718’s precipitation and mechanical properties produced by LBPF plus heat treatment, Materials Science and Engineering: A, 849; 143530, 2022. doi.org/10.1016/j.msea.2022.143530

101-22   Yufan Zhao, Kenta Aoyagi, Kenta Yamanaka, Akihiko Chiba, A survey on basic influencing factors of solidified grain morphology during electron beam melting, Materials & Design, 221; 110927, 2022. doi.org/10.1016/j.matdes.2022.110927

98-22   Jon Spangenberg, Wilson Ricardo Leal da Silva, Md. Tusher Mollah, Raphaël Comminal, Thomas Juul Andersen, Henrik Stang, Integrating reinforcement with 3D concrete printing: Experiments and numerical modelling, Third RILEM International Conference on Concrete and Digital Fabrication, Eds. Ana Blanco, Peter Kinnell, Richard Buswell, Sergio Cavalaro, pp. 379-384, 2022.

93-22   Minglei Qu, Qilin Guo, Luis I. Escano, Samuel J. Clark Kamel Fezzaa, Lianyi Chen, Mitigating keyhole pore formation by nanoparticles during laser powder bed fusion additive manufacturing, Additive Manufacturing Letters, 100068, 2022. doi.org/10.1016/j.addlet.2022.100068

86-22   Patiparn Ninpetch, Prasert Chalermkarnnon, Pruet Kowitwarangkul, Multiphysics simulation of thermal-fluid behavior in laser powder bed fusion of H13 steel: Influence of layer thickness and energy input, Metals and Materials International, 2022. doi.org/10.1007/s12540-022-01239-z

85-22   Merve Biyikli, Taner Karagoz, Metin Calli, Talha Muslim, A. Alper Ozalp, Ali Bayram, Single track geometry prediction of laser metal deposited 316L-Si via multi-physics modelling and regression analysis with experimental validation, Metals and Materials International, 2022. doi.org/10.1007/s12540-022-01243-3

76-22   Zhichao Yang, Shuhao Wang, Lida Zhu, Jinsheng Ning, Bo Xin, Yichao Dun, Wentao Yan, Manipulating molten pool dynamics during metal 3D printing by ultrasound, Applied Physics Reviews, 9; 021416, 2022. doi.org/10.1063/5.0082461

73-22   Yu Sun, Liqun Li, Yu Hao, Sanbao Lin, Xinhua Tang, Fenggui Lu, Numerical modeling on formation of periodic chain-like pores in high power laser welding of thick steel plate, Journal of Materials Processing Technology, 306; 117638, 2022. doi.org/10.1016/j.jmatprotec.2022.117638

67-22   Yu Hao, Hiu-Ping Wang, Yu Sun, Liqun Li, Yihan Wu, Fenggui Lu, The evaporation behavior of zince and its effect on spattering in laser overlap welding of galvanized steels, Journal of Materials Processing Technology, 306; 117625, 2022. doi.org/10.1016/j.jmatprotec.2022.117625

65-22   Yanhua Zhao, Chuanbin Du, Peifu Wang, Wei Meng, Changming Li, The mechanism of in-situ laser polishing and its effect on the surface quality of nickel-based alloy fabricated by selective laser melting, Metals, 12.5; 778, 2022. doi.org/10.3390/met12050778

58-22   W.E. Alphonso, M. Bayat, M. Baier, S. Carmignato, J.H. Hattel, Multi-physics numerical modelling of 316L Austenitic stainless steel in laser powder bed fusion process at meso-scale, 17th UK Heat Transfer Conference (UKHTC2021), Manchester, UK, April 4-6, 2022.

57-22   Brandon Hayes, Travis Hainsworth, Robert MacCurdy, Liquid-solid co-printing of multi-material 3D fluidic devices via material jetting, Additive Manufacturing, in press, 102785, 2022. doi.org/10.1016/j.addma.2022.102785

55-22   Xiang Wang, Lin-Jie Zhang, Jie Ning, Suck-joo Na, Fluid thermodynamic simulation of Ti-6Al-4V alloy in laser wire deposition, 3D Printing and Additive Manufacturing, 2022. doi.org/10.1089/3dp.2021.0159

54-22   Junhao Zhao, Binbin Wang, Tong Liu, Liangshu Luo, Yanan Wang, Xiaonan Zheng, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu, Dayong Chen, Study of in situ formed quasicrystals in Al-Mn based alloys fabricated by SLM, Journal of Alloys and Compounds, 909; 164847, 2022. doi.org/10.1016/j.jallcom.2022.164847

48-22   Yueming Sun, Jianxing Ma, Fei Peng, Konstantin G. Kornev, Making droplets from highly viscous liquids by pushing a wire through a tube, Physics of Fluids, 34; 032119, 2022. doi.org/10.1063/5.0082003

46-22   H.Z. Lu, T. Chen, H. Liu, H. Wang, X. Luo, C.H. Song, Constructing function domains in NiTi shape memory alloys by additive manufacturing, Virtual and Physical Prototyping, 17.3; 2022. doi.org/10.1080/17452759.2022.2053821

42-22   Islam Hassan, P. Ravi Selvaganapathy, Microfluidic printheads for highly switchable multimaterial 3D printing of soft materials, Advanced Materials Technologies, 2101709, 2022. doi.org/10.1002/admt.202101709

41-22   Nan Yang, Youping Gong, Honghao Chen, Wenxin Li, Chuanping Zhou, Rougang Zhou, Huifeng Shao, Personalized artificial tibia bone structure design and processing based on laser powder bed fusion, Machines, 10.3; 205, 2022. doi.org/10.3390/machines10030205

31-22   Bo Shen, Raghav Gnanasambandam, Rongxuan Wang, Zhenyu (James) Kong, Multi-Task Gaussian process upper confidence bound for hyperparameter tuning and its application for simulation studies of additive manufacturing, IISE Transactions, 2022. doi.org/10.1080/24725854.2022.2039813

27-22   Lida Zhu, Shuhao Wang, Hao Lu, Dongxing Qi, Dan Wang, Zhichao Yang, Investigation on synergism between additive and subtractive manufacturing for curved thin-walled structure, Virtual and Physical Prototyping, 17.2; 2022. doi.org/10.1080/17452759.2022.2029009

24-22   Hoon Sohn, Peipei Liu, Hansol Yoon, Kiyoon Yi, Liu Yang, Sangjun Kim, Real-time porosity reduction during metal directed energy deposition using a pulse laser, Journal of Materials Science & Technology, 116; pp. 214-223. doi.org/10.1016/j.jmst.2021.12.013

18-22   Yaohong Xiao, Zixuan Wan, Pengwei Liu, Zhuo Wang, Jingjing Li, Lei Chen, Quantitative simulations of grain nucleation and growth at additively manufactured bimetallic interfaces of SS316L and IN625, Journal of Materials Processing Technology, 302; 117506, 2022. doi.org/10.1016/j.jmatprotec.2022.117506

06-22   Amal Charles, Mohamad Bayat, Ahmed Elkaseer, Lore Thijs, Jesper Henri Hattel, Steffen Scholz, Elucidation of dross formation in laser powder bed fusion at down-facing surfaces: Phenomenon-oriented multiphysics simulation and experimental validation, Additive Manufacturing, 50; 102551, 2022. doi.org/10.1016/j.addma.2021.102551

05-22   Feilong Ji, Xunpeng Qin, Zeqi Hu, Xiaochen Xiong, Mao Ni, Mengwu Wu, Influence of ultrasonic vibration on molten pool behavior and deposition layer forming morphology for wire and arc additive manufacturing, International Communications in Heat and Mass Transfer, 130; 105789, 2022. doi.org/10.1016/j.icheatmasstransfer.2021.105789

158-21 Caleb E. Andrews, Megan P. Chatham, Samantha F. Dorman, Ian D. McCue, Joseph J. Sopcisak, Mitra L. Taheri, Additive manufacturing of NiZnCu-ferrite soft magnetic composites, Journal of Materials Research, 36; pp. 3579-3590, 2021. doi.org/10.1557/s43578-021-00343-x

150-21   Daniel Knüttel, Stefano Baraldo, Anna Valente, Konrad Wegener, Emanuele Carpanzano, Model based learning for efficient modelling of heat transfer dynamics, Procedia CIRP, 102; pp. 252-257, 2021. doi.org/10.1016/j.procir.2021.09.043

149-21   T. van Rhijn, W. du Preez, M. Maringa, D. Kouprianoff, Towards predicting process parameters for selective laser melting of titanium alloys through the modelling of melt pool characteristics, Suid-Afrikaanse Tydskrif vir Natuurwetenskap en Tegnologie, 40.1; 2021.

148-21   Qian Chen, Multiscale process modeling of residual deformation and defect formation for laser powder bed fusion additive manufacturing, Thesis, University of Pittsburgh, Pittsburgh, PA USA, 2021.

147-21   Pareekshith Allu, Developing process parameters through CFD simulations, Lasers in Manufacturing Conference, 2021.

143-21   Asif Ur Rehman, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu, Spatter formation and splashing induced defects in laser-based powder bed fusion of AlSi10Mg alloy: A novel hydrodynamics modelling with empirical testing, Metals, 11.12; 2023, 2021. doi.org/10.3390/met11122023

142-21   Islam Hassan, Ponnambalam Ravi Selvaganapathy, A microfluidic printhead with integrated hybrid mixing by sequential injection for multimaterial 3D printing, Additive Manufacturing, 102559, 2021. doi.org/10.1016/j.addma.2021.102559

137-21   Ting-Yu Cheng, Ying-Chih Liao, Enhancing drop mixing in powder bed by alternative particle arrangements with contradictory hydrophilicity, Journal of the Taiwan Institute of Chemical Engineers, 104160, 2021. doi.org/10.1016/j.jtice.2021.104160

134-21   Asif Ur Rehman, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu, Keyhole formation by laser drilling in laser powder bed fusion of Ti6Al4V biomedical alloy: Mesoscopic computational fluid dynamics simulation versus mathematical modelling using empirical validation, Nanomaterials, 11.2; 3284, 2021. doi.org/10.3390/nano11123284

128-21   Sang-Woo Han, Won-Ik Cho, Lin-Jie Zhang, Suck-Joo Na, Coupled simulation of thermal-metallurgical-mechanical behavior in laser keyhole welding of AH36 steel, Materials & Design, 212; 110275, 2021. doi.org/10.1016/j.matdes.2021.110275

127-21   Jiankang Huang, Zhuoxuan Li, Shurong Yu, Xiaoquan Yu, Ding Fan, Real-time observation and numerical simulation of the molten pool flow and mass transfer behavior during wire arc additive manufacturing, Welding in the World, 2021. doi.org/10.1007/s40194-021-01214-z

123-21   Boxue Song, Tianbiao Yu, Xingyu Jiang, Wenchao Xi, Xiaoli Lin, Zhelun Ma, ZhaoWang, Development of the molten pool and solidification characterization in single bead multilayer direct energy deposition, Additive Manufacturing, 102479, 2021. doi.org/10.1016/j.addma.2021.102479

112-21   Kathryn Small, Ian D. McCue, Katrina Johnston, Ian Donaldson, Mitra L. Taheri, Precision modification of microstructure and properties through laser engraving, JOM, 2021. doi.org/10.1007/s11837-021-04959-6

111-21   Yongki Lee, Jason Cheon, Byung-Kwon Min, Cheolhee Kim, Modelling of fume particle behaviour and coupling glass contamination during vacuum laser beam welding, Science and Technology of Welding and Joining, 2021. doi.org/10.1080/13621718.2021.1990658

110-21   Menglin Liu, Hao Yi, Huajun Cao, Rufeng Huang, Le Jia, Heat accumulation effect in metal droplet-based 3D printing: Evolution mechanism and elimination strategy, Additive Manufacturing, 48.A; 102413, 2021. doi.org/10.1016/j.addma.2021.102413

108-21   Nozomi Taura, Akiya Mitsunobu, Tatsuhiko Sakai, Yasuhiro Okamoto, Akira Okada, Formation and its mechanism of high-speed micro-grooving on metal surface by angled CW laser irradiation, Journal of Laser Micro/Nanoengineering, 16.2, 2021. doi.org/10.2961/jlmn.2021.02.2006

105-21   Jon Spangenberg, Wilson Ricardo Leal da Silva, Raphaël Comminal, Md. Tusher Mollah, Thomas Juul Andersen, Henrik Stang, Numerical simulation of multi-layer 3D concrete printing, RILEM Technical Letters, 6; pp. 119-123, 2021. doi.org/10.21809/rilemtechlett.2021.142

104-21   Lin Chen, Chunming Wang, Gaoyang Mi, Xiong Zhang, Effects of laser oscillating frequency on energy distribution, molten pool morphology and grain structure of AA6061/AA5182 aluminum alloys lap welding, Journal of Materials Research and Technology, 15; pp. 3133-3148, 2021. doi.org/10.1016/j.jmrt.2021.09.141

101-21   R.J.M. Wolfs, T.A.M. Salet, N. Roussel, Filament geometry control in extrusion-based additive manufacturing of concrete: The good, the bad and the ugly, Cement and Concrete Research, 150; 106615, 2021. doi.org/10.1016/j.cemconres.2021.106615

89-21   Wenlin Ye, Jin Bao, Jie Lei, Yichang Huang, Zhihao Li, Peisheng Li, Ying Zhang, Multiphysics modeling of thermal behavior of commercial pure titanium powder during selective laser melting, Metals and Materials International, 2021. doi.org/10.1007/s12540-021-01019-1

81-21   Lin Chen, Gaoyang Mi, Xiong Zhang, Chunming Wang, Effects of sinusoidal oscillating laser beam on weld formation, melt flow and grain structure during aluminum alloys lap welding, Journals of Materials Processing Technology, 298; 117314, 2021. doi.org/10.1016/j.jmatprotec.2021.117314

77-21   Yujie Cui, Yufan Zhao, Haruko Numata, Kenta Yamanaka, Huakang Bian, Kenta Aoyagi, Akihiko Chiba, Effects of process parameters and cooling gas on powder formation during the plasma rotating electrode process, Powder Technology, 393; pp. 301-311, 2021. doi.org/10.1016/j.powtec.2021.07.062

76-21   Md Tusher Mollah, Raphaël Comminal, Marcin P. Serdeczny, David B. Pedersen, Jon Spangenberg, Stability and deformations of deposited layers in material extrusion additive manufacturing, Additive Manufacturing, 46; 102193, 2021. doi.org/10.1016/j.addma.2021.102193

72-21   S. Sabooni, A. Chabok, S.C. Feng, H. Blaauw, T.C. Pijper, H.J. Yang, Y.T. Pei, Laser powder bed fusion of 17–4 PH stainless steel: A comparative study on the effect of heat treatment on the microstructure evolution and mechanical properties, Additive Manufacturing, 46; 102176, 2021. doi.org/10.1016/j.addma.2021.102176

71-21   Yu Hao, Nannan Chena, Hui-Ping Wang, Blair E. Carlson, Fenggui Lu, Effect of zinc vapor forces on spattering in partial penetration laser welding of zinc-coated steels, Journal of Materials Processing Technology, 298; 117282, 2021. doi.org/10.1016/j.jmatprotec.2021.117282

67-21   Lu Wang, Wentao Yan, Thermoelectric magnetohydrodynamic model for laser-based metal additive manufacturing, Physical Review Applied, 15.6; 064051, 2021. doi.org/10.1103/PhysRevApplied.15.064051

61-21   Ian D. McCue, Gianna M. Valentino, Douglas B. Trigg, Andrew M. Lennon, Chuck E. Hebert, Drew P. Seker, Salahudin M. Nimer, James P. Mastrandrea, Morgana M. Trexler, Steven M. Storck, Controlled shape-morphing metallic components for deployable structures, Materials & Design, 208; 109935, 2021. doi.org/10.1016/j.matdes.2021.109935

60-21   Mahyar Khorasani, AmirHossein Ghasemi, Martin Leary, William O’Neil, Ian Gibson, Laura Cordova, Bernard Rolfe, Numerical and analytical investigation on meltpool temperature of laser-based powder bed fusion of IN718, International Journal of Heat and Mass Transfer, 177; 121477, 2021. doi.org/10.1016/j.ijheatmasstransfer.2021.121477

57-21   Dae-Won Cho, Yeong-Do Park, Muralimohan Cheepu, Numerical simulation of slag movement from Marangoni flow for GMAW with computational fluid dynamics, International Communications in Heat and Mass Transfer, 125; 105243, 2021. doi.org/10.1016/j.icheatmasstransfer.2021.105243

55-21   Won-Sang Shin, Dae-Won Cho, Donghyuck Jung, Heeshin Kang, Jeng O Kim, Yoon-Jun Kim, Changkyoo Park, Investigation on laser welding of Al ribbon to Cu sheet: Weldability, microstructure and mechanical and electrical properties, Metals, 11.5; 831, 2021. doi.org/10.3390/met11050831

50-21   Mohamad Bayat, Venkata K. Nadimpalli, Francesco G. Biondani, Sina Jafarzadeh, Jesper Thorborg, Niels S. Tiedje, Giuliano Bissacco, David B. Pedersen, Jesper H. Hattel, On the role of the powder stream on the heat and fluid flow conditions during directed energy deposition of maraging steel—Multiphysics modeling and experimental validation, Additive Manufacturing, 43;102021, 2021. doi.org/10.1016/j.addma.2021.102021

47-21   Subin Shrestha, Kevin Chou, An investigation into melting modes in selective laser melting of Inconel 625 powder: single track geometry and porosity, The International Journal of Advanced Manufacturing Technology, 2021. doi.org/10.1007/s00170-021-07105-3

34-21   Haokun Sun, Xin Chu, Cheng Luo, Haoxiu Chen, Zhiying Liu, Yansong Zhang, Yu Zou, Selective laser melting for joining dissimilar materials: Investigations ofiInterfacial characteristics and in situ alloying, Metallurgical and Materials Transactions A, 52; pp. 1540-1550, 2021. doi.org/10.1007/s11661-021-06178-9

32-21   Shanshan Zhang, Subin Shrestha, Kevin Chou, On mesoscopic surface formation in metal laser powder-bed fusion process, Supplemental Proceedings, TMS 150th Annual Meeting & Exhibition (Virtual), pp. 149-161, 2021. doi.org/10.1007/978-3-030-65261-6_14

22-21   Patiparn Ninpetch, Pruet Kowitwarangkul, Sitthipong Mahathanabodee, Prasert Chalermkarnnon, Phadungsak Rattanadecho, Computational investigation of thermal behavior and molten metal flow with moving laser heat source for selective laser melting process, Case Studies in Thermal Engineering, 24; 100860, 2021. doi.org/10.1016/j.csite.2021.100860

19-21   M.B. Abrami, C. Ransenigo, M. Tocci, A. Pola, M. Obeidi, D. Brabazon, Numerical simulation of laser powder bed fusion processes, La Metallurgia Italiana, February; pp. 81-89, 2021.

16-21   Wenjun Ge, Jerry Y.H. Fuh, Suck Joo Na, Numerical modelling of keyhole formation in selective laser melting of Ti6Al4V, Journal of Manufacturing Processes, 62; pp. 646-654, 2021. doi.org/10.1016/j.jmapro.2021.01.005

11-21   Mohamad Bayat, Venkata K. Nadimpalli, David B. Pedersen, Jesper H. Hattel, A fundamental investigation of thermo-capillarity in laser powder bed fusion of metals and alloys, International Journal of Heat and Mass Transfer, 166; 120766, 2021. doi.org/10.1016/j.ijheatmasstransfer.2020.120766

10-21   Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, Kenta Yamanaka, Akihiko Chiba, Thermal properties of powder beds in energy absorption and heat transfer during additive manufacturing with electron beam, Powder Technology, 381; pp. 44-54, 2021. doi.org/10.1016/j.powtec.2020.11.082

9-21   Subin Shrestha, Kevin Chou, A study of transient and steady-state regions from single-track deposition in laser powder bed fusion, Journal of Manufacturing Processes, 61; pp. 226-235, 2021. doi.org/10.1016/j.jmapro.2020.11.023

6-21   Qian Chen, Yunhao Zhao, Seth Strayer, Yufan Zhao, Kenta Aoyagi, Yuichiro Koizumi, Akihiko Chiba, Wei Xiong, Albert C. To, Elucidating the effect of preheating temperature on melt pool morphology variation in Inconel 718 laser powder bed fusion via simulation and experiment, Additive Manufacturing, 37; 101642, 2021. doi.org/10.1016/j.addma.2020.101642

04-21   Won-Ik Cho, Peer Woizeschke, Analysis of molten pool dynamics in laser welding with beam oscillation and filler wire feeding, International Journal of Heat and Mass Transfer, 164; 120623, 2021. doi.org/10.1016/j.ijheatmasstransfer.2020.120623

128-20   Mahmood Al Bashir, Rajeev Nair, Martina M. Sanchez, Anil Mahapatro, Improving fluid retention properties of 316L stainless steel using nanosecond pulsed laser surface texturing, Journal of Laser Applications, 32.4, 2020. doi.org/10.2351/7.0000199

127-20   Eric Riedel, Niklas Bergedieck, Stefan Scharf, CFD simulation based investigation of cavitation cynamics during high intensity ultrasonic treatment of A356, Metals, 10.11; 1529, 2020. doi.org/10.3390/met10111529

126-20   Benjamin Himmel, Material jetting of aluminium: Analysis of a novel additive manufacturing process, Thesis, Technical University of Munich, 2020.

121-20   Yufan Zhao, Yujie Cui, Haruko Numata, Huakang Bian, Kimio Wako, Kenta Yamanaka, Kenta Aoyagi, Akihiko Chiba, Centrifugal granulation behavior in metallic powder fabrication by plasma rotating electrode process, Scientific Reports, 10; 18446, 2020. doi.org/10.1038/s41598-020-75503-w

116-20   Raphael Comminal, Wilson Ricardo Leal da Silva, Thomas Juul Andersen, Henrik Stang, Jon Spangenberg, Modelling of 3D concrete printing based on computational fluid dynamics, Cement and Concrete Research, 138; 106256, 2020. doi.org/10.1016/j.cemconres.2020.106256

112-20   Peng Liu, Lijin Huan, Yu Gan, Yuyu Lei, Effect of plate thickness on weld pool dynamics and keyhole-induced porosity formation in laser welding of Al alloy, The International Journal of Advanced Manufacturing Technology, 111; pp. 735-747, 2020. doi.org/10.1007/s00170-020-05818-5

108-20   Fan Chen, Wentao Yan, High-fidelity modelling of thermal stress for additive manufacturing by linking thermal-fluid and mechanical models, Materials & Design, 196; 109185, 2020. doi.org/10.1016/j.matdes.2020.109185

104-20   Yunfu Tian, Lijun Yang, Dejin Zhao, Yiming Huang, Jiajing Pan, Numerical analysis of powder bed generation and single track forming for selective laser melting of SS316L stainless steel, Journal of Manufacturing Processes, 58; pp. 964-974, 2020. doi.org/10.1016/j.jmapro.2020.09.002

100-20   Raphaël Comminal, Sina Jafarzadeh, Marcin Serdeczny, Jon Spangenberg, Estimations of interlayer contacts in extrusion additive manufacturing using a CFD model, International Conference on Additive Manufacturing in Products and Applications (AMPA), Zurich, Switzerland, September 1-3: Industrializing Additive Manufacturing, pp. 241-250, 2020. doi.org/10.1007/978-3-030-54334-1_17

97-20   Paree Allu, CFD simulation for metal Additive Manufacturing: Applications in laser- and sinter-based processes, Metal AM, 6.4; pp. 151-158, 2020.

95-20   Yufan Zhao, Kenta Aoyagi, Kenta Yamanaka, Akihiko Chiba, Role of operating and environmental conditions in determining molten pool dynamics during electron beam melting and selective laser melting, Additive Manufacturing, 36; 101559, 2020. doi.org/10.1016/j.addma.2020.101559

94-20   Yan Zeng, David Himmler, Peter Randelzhofer, Carolin Körner, Processing of in situ Al3Ti/Al composites by advanced high shear technology: influence of mixing speed, The International Journal of Advanced Manufacturing Technology, 110; pp. 1589-1599, 2020. doi.org/10.1007/s00170-020-05956-w

93-20   H. Hamed Zargari, K. Ito, M. Kumar, A. Sharma, Visualizing the vibration effect on the tandem-pulsed gas metal arc welding in the presence of surface tension active elements, International Journal of Heat and Mass Transfer, 161; 120310, 2020. doi.org/10.1016/j.ijheatmasstransfer.2020.120310

90-20   Guangxi Zhao, Jun Du, Zhengying Wei, Siyuan Xu, Ruwei Geng, Numerical analysis of aluminum alloy fused coating process, Journal of the Brazilian Society of Mechanical Science and Engineering, 42; 483, 2020. doi.org/10.1007/s40430-020-02569-y

85-20   Wenkang Huang, Hongliang Wang, Teresa Rinker, Wenda Tan, Investigation of metal mixing in laser keyhold welding of dissimilar metals, Materials & Design, 195; 109056, 2020. doi.org/10.1016/j.matdes.2020.109056

82-20   Pan Lu, Zhang Cheng-Lin, Wang Liang, Liu Tong, Liu Jiang-lin, Molten pool structure, temperature and velocity flow in selective laser melting AlCu5MnCdVA alloy, Materials Research Express, 7; 086516, 2020. doi.org/10.1088/2053-1591/abadcf

80-20   Yujie Cui, Yufan Zhao, Haruko Numata, Huakang Bian, Kimio Wako, Kento Yamanaka, Kenta Aoyagi, Chen Zhang, Akihiko Chiba, Effects of plasma rotating electrode process parameters on the particle size distribution and microstructure of Ti-6Al-4 V alloy powder, Powder Technology, 376; pp. 363-372, 2020. doi.org/10.1016/j.powtec.2020.08.027

78-20   F.Q. Liu, L. Wei, S.Q. Shi, H.L. Wei, On the varieties of build features during multi-layer laser directed energy deposition, Additive Manufacturing, 36; 101491, 2020. doi.org/10.1016/j.addma.2020.101491

75-20   Nannan Chen, Zixuan Wan, Hui-Ping Wang, Jingjing Li, Joshua Solomon, Blair E. Carlson, Effect of Al single bond Si coating on laser spot welding of press hardened steel and process improvement with annular stirring, Materials & Design, 195; 108986, 2020. doi.org/10.1016/j.matdes.2020.108986

72-20   Yujie Cui, Kenta Aoyagi, Yufan Zhao, Kenta Yamanaka, Yuichiro Hayasaka, Yuichiro Koizumi, Tadashi Fujieda, Akihiko Chiba, Manufacturing of a nanosized TiB strengthened Ti-based alloy via electron beam powder bed fusion, Additive Manufacturing, 36; 101472, 2020. doi.org/10.1016/j.addma.2020.101472

64-20   Dong-Rong Liu, Shuhao Wang, Wentao Yan, Grain structure evolution in transition-mode melting in direct energy deposition, Materials & Design, 194; 108919, 2020. doi.org/10.1016/j.matdes.2020.108919

61-20   Raphael Comminal, Wilson Ricardo Leal da Silva, Thomas Juul Andersen, Henrik Stang, Jon Spangenberg, Influence of processing parameters on the layer geometry in 3D concrete printing: Experiments and modelling, 2nd RILEM International Conference on Concrete and Digital Fabrication, RILEM Bookseries, 28; pp. 852-862, 2020. doi.org/10.1007/978-3-030-49916-7_83

60-20   Marcin P. Serdeczny, Raphaël Comminal, Md. Tusher Mollah, David B. Pedersen, Jon Spangenberg, Numerical modeling of the polymer flow through the hot-end in filament-based material extrusion additive manufacturing, Additive Manufacturing, 36; 101454, 2020. doi.org/10.1016/j.addma.2020.101454

58-20   H.L. Wei, T. Mukherjee, W. Zhang, J.S. Zuback, G.L. Knapp, A. De, T. DebRoy, Mechanistic models for additive manufacturing of metallic components, Progress in Materials Science, 116; 100703, 2020. doi.org/10.1016/j.pmatsci.2020.100703

55-20   Masoud Mohammadpour, Experimental study and numerical simulation of heat transfer and fluid flow in laser welded and brazed joints, Thesis, Southern Methodist University, 2020.

48-20   Masoud Mohammadpour, Baixuan Yang, Hui-Ping Wang, John Forrest, Michael Poss, Blair Carlson, Radovan Kovacevica, Influence of laser beam inclination angle on galvanized steel laser braze quality, Optics and Laser Technology, 129; 106303, 2020. doi.org/10.1016/j.optlastec.2020.106303

34-20   Binqi Liu, Gang Fang, Liping Lei, Wei Liu, A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM), Applied Mathematical Modeling, 79; pp. 506-520, 2020. doi.org/10.1016/j.apm.2019.10.049

27-20 Xuesong Gao, Guilherme Abreu Farira, Wei Zhang, Kevin Wheeler, Numerical analysis of non-spherical particle effect on molten pool dynamics in laser-powder bed fusion additive manufacturing, Computational Materials Science, 179; 109648, 2020. doi.org/10.1016/j.commatsci.2020.109648

26-20 Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, Kenta Yamanaka, Akihiko Chiba, Isothermal γ → ε phase transformation behavior in a Co-Cr-Mo alloy depending on thermal history during electron beam powder-bed additive manufacturing, Journal of Materials Science & Technology, 50; pp. 162-170, 2020. doi.org/10.1016/j.jmst.2019.11.040

21-20 Won-Ik Cho, Peer Woizeschke, Analysis of molten pool behavior with buttonhole formation in laser keyhole welding of sheet metal, International Journal of Heat and Mass Transfer, 152; 119528, 2020. doi.org/10.1016/j.ijheatmasstransfer.2020.119528

6-20 Wei Xing, Di Ouyang, Zhen Chen, Lin Liu, Effect of energy density on defect evolution in 3D printed Zr-based metallic glasses by selective laser melting, Science China Physics, Mechanics & Astronomy, 63; 226111, 2020. doi.org/10.1007/s11433-019-1485-8

2-20 Dongsheng Wu, Shinichi Tashiro, Ziang Wu, Kazufumi Nomura, Xueming Hua, Manabu Tanaka, Analysis of heat transfer and material flow in hybrid KPAW-GMAW process based on the novel three dimensional CFD simulation, International Journal of Heat and Mass Transfer, 147; 118921, 2020. doi.org/10.1016/j.ijheatmasstransfer.2019.118921

1-20 Xiang Huang, Siying Lin, Zhenxiang Bu, Xiaolong Lin, Weijin Yi, Zhihong Lin, Peiqin Xie, Lingyun Wang, Research on nozzle and needle combination for high frequency piezostack-driven dispenser, International Journal of Adhesion and Adhesives, 96, 2020. doi.org/10.1016/j.ijadhadh.2019.102453

118-19 Ian McCue, Christopher Peitsch, Tim Montalbano, Andrew Lennon, Joseph Sopcisak, Morgana M. Trexler, Steven Storck, Scalable laser powder bed fusion processing of nitinol shape memory alloy, MRS Communications, 9; pp. 1214-1220, 2019. doi.org/10.1557/mrc.2019.134

87-19 Bo Cheng, Charles Tuffile, Numerical study of porosity formation with implementation of laser multiple reflection in selective laser melting, Proceedings, ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC2019-2891, 2019. doi.org/10.1115/MSEC2019-2891

86-19 Shuhao Wang, Lida Zhu, Jerry Ying His Fuh, Haiquan Zhang, Wentao Yan, Multi-physics modeling and Gaussian process regression analysis of cladding track geometry for direct energy deposition, Optics and Lasers in Engineering, 127; 105950, 2019. doi.org/10.1016/j.optlaseng.2019.105950

78-19 Bo Cheng, Lukas Loeber, Hannes Willeck, Udo Hartel, Charles Tuffile, Computational investigation of melt pool process dynamics and pore formation in laser powder bed fusion, Journal of Materials Engineering and Performance, 28.11; pp. 6565-6578, 2019. doi.org/10.1007/s11665-019-04435-y

77-19 David Souders, Pareekshith Allu, Anurag Chandorkar, Ruendy Castillo, Application of computational fluid dynamics in developing process parameters for additive manufacturing, 9th International Conference on 3D Printing and Additive Manufacturing Technologies, 2019.

75-19 Raphaël Comminal, Marcin Piotr Serdeczny, Navid Ranjbar, Mehdi Mehrali, David Bue Pedersen, Henrik Stang, Jon Spangenberg, Modelling of material deposition in big area additive manufacturing and 3D concrete printing, Advancing Precision in Additive Manufacturing, 2019.

73-19 Baohua Chang, Zhang Yuan, Hao Cheng, Haigang Li, Dong Du, Jiguo Shan, A study on the influences of welding position on the keyhole and molten pool behavior in laser welding of a titanium alloy, Metals, 9.10; 1082, 2019. doi.org/10.3390/met9101082

57-19 Shengjie Deng, Hui-Ping Wang, Fenggui Lu, Joshua Solomon, Blair E. Carlson, Investigation of spatter occurrence in remote laser spiral welding of zinc-coated steels, International Journal of Heat and Mass Transfer, 140; pp. 269-280, 2019. doi.org/10.1016/j.ijheatmasstransfer.2019.06.009

53-19 Mohamad Bayat, Aditi Thanki, Sankhya Mohanty, Ann Witvrouw, Shoufeng Yang, Jesper Thorborg, Niels Skat Tieldje, Jesper Henri Hattel, Keyhole-induced porosities in laser-based powder bed fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation, Additive Manufacturing, 30; 100835, 2019. doi.org/10.1016/j.addma.2019.100835

51-19 P. Ninpetch, P. Kowitwarangkul, S. Mahathanabodee, R. Tongsri, P. Ratanadecho, Thermal and melting track simulations of laser powder bed fusion (L-PBF), IOP Conference Series: Materials Science and Engineering, 526; 012030, 2019. doi.org/10.1088/1757-899X/526/1/012030

46-19 Hongze Wang, Yu Zou, Microscale interaction between laser and metal powder in powder-bed additive manufacturing: Conduction mode versus keyhole mode, International Journal of Heat and Mass Transfer, 142; 118473, 2019. doi.org/10.1016/j.ijheatmasstransfer.2019.118473

45-19 Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, Kenta Yamanaka, Akihiko Chiba, Manipulating local heat accumulation towards controlled quality and microstructure of a Co-Cr-Mo alloy in powder bed fusion with electron beam, Materials Letters, 254; pp. 269-272, 2019. doi.org/10.1016/j.matlet.2019.07.078

44-19 Guoxiang Xu, Lin Li, Houxiao Wang, Pengfei Li, Qinghu Guo, Qingxian Hu, Baoshuai Du, Simulation and experimental studies of keyhole induced porosity in laser-MIG hybrid fillet welding of aluminum alloy in the horizontal position, Optics & Laser Technology, 119; 105667, 2019. doi.org/10.1016/j.optlastec.2019.105667

38-19 Subin Shrestha, Y. Kevin Chou, A numerical study on the keyhole formation during laser powder bed fusion process, Journal of Manufacturing Science and Engineering, 141.10, 2019. doi.org/10.1115/1.4044100

34-19 Dae-Won Cho, Jin-Hyeong Park, Hyeong-Soon Moon, A study on molten pool behavior in the one pulse one drop GMAW process using computational fluid dynamics, International Journal of Heat and Mass Transfer, 139; pp. 848-859, 2019. doi.org/10.1016/j.ijheatmasstransfer.2019.05.038

30-19 Mohamad Bayat, Sankhya Mohanty, Jesper Henri Hattel, Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF, International Journal of Heat and Mass Transfer, 139; pp. 95-114, 2019. doi.org/10.1016/j.ijheatmasstransfer.2019.05.003

29-19 Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, Daixiu Wei, Kenta Yamanaka, Akihiko Chiba, Comprehensive study on mechanisms for grain morphology evolution and texture development in powder bed fusion with electron beam of Co–Cr–Mo alloy, Materialia, 6; 100346, 2019. doi.org/10.1016/j.mtla.2019.100346

28-19 Pareekshith Allu, Computational fluid dynamics modeling in additive manufacturing processes, The Minerals, Metals & Materials Society (TMS) 148th Annual Meeting & Exhibition, 2019.

22-19 Hunchul Jeong, Kyungbae Park, Sungjin Baek, Jungho Cho, Thermal efficiency decision of variable polarity aluminum arc welding through molten pool analysis, International Journal of Heat and Mass Transfer, 138; pp. 729-737, 2019. doi.org/10.1016/j.ijheatmasstransfer.2019.04.089

12-19 Yanqiao Pan, Liangcai Zeng, Simulation and validation of droplet generation process for revealing three design constraints in electrohydrodynamic jet printing, Micromachines, 10.2; 94, 2019. doi.org/10.3390/mi10020094

11-19 Ryotaro Shimada, Tsutomu Kono, Koji Masuda, Yoshiyuki Komoda, The numerical analysis of particle-size distribution of clusters in shear flow at one-dimensional closed system and three-dimensional open system, Advanced Powder Technology, 30.4; pp. 774-785, 2019. doi.org/10.1016/j.apt.2019.01.006

7-19 Guangxi Zhao, Jun Du, Zhengying Wei, Ruwei Geng, Siyuan Xu, Numerical analysis of arc driving forces and temperature distribution in pulsed TIG welding, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41; 60, 2019. doi.org/10.1007/s40430-018-1563-0

4-19 Santosh Reddy Sama, Tony Badamo, Paul Lynch, Guha Manogharan, Novel sprue designs in metal casting via 3D sand-printing, Additive Manufacturing, 25; pp. 563-578, 2019. doi.org/10.1016/j.addma.2018.12.009

3-19 Dongsheng Wu, Anh Van Nguyen, Shinichi Tashiro, Xueming Hua, Manabu Tanaka, Elucidation of the weld pool convection and keyhole formation mechanism in the keyhold plasma arc welding, International Journal of Heat and Mass Transfer, 131; pp. 920-931, 2019. doi.org/10.1016/j.ijheatmasstransfer.2018.11.108

97-18 Wentao Yan, Ya Qian, Wenjun Ge, Stephen Lin, Wing Kam Liu, Feng Lin, Gregory J. Wagner, Meso-scale modeling of multiple-layer fabrication process in selective electron beam melting: Inter-layer/track voids formation, Materials & Design, 141; pp. 210-219, 2018. doi.org/10.1016/j.matdes.2017.12.031

84-18 Bo Cheng, Xiaobai Li, Charles Tuffile, Alexander Ilin, Hannes Willeck, Udo Hartel, Multi-physics modeling of single track scanning in selective laser melting: Powder compaction effect, Proceedings, 29th Annual International Solid Freeform Fabrication Symposium, pp. 1887-1902, 2018.

81-18 Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, Daixiu Wei, Kenta Yamanaka, Akihiko Chiba, Molten pool behavior and effect of fluid flow on solidification conditions in selective electron beam melting (SEBM) of a biomedical Co-Cr-Mo alloy, Additive Manufacturing, 26; pp. 202-214, 2018. doi.org/10.1016/j.addma.2018.12.002

77-18 Jun Du, Zhengying Wei, Numerical investigation of thermocapillary-induced deposited shape in fused-coating additive manufacturing process of aluminum alloy, Journal of Physics Communications, 2; 115013, 2018. doi.org/10.1088/2399-6528/aaedc7

76-18 Yu Xiang, Shuzhe Zhang, Zhengying We, Junfeng Li, Pei Wei, Zhen Chen, Lixiang Yang, Lihao Jiang, Forming and defect analysis for single track scanning in selective laser melting of Ti6Al4V, Applied Physics A, 124; 685, 2018. doi.org/10.1007/s00339-018-2056-9

74-18 Paree Allu, CFD simulations for laser welding of Al alloys, Die Casting Congress & Exposition, 2018.

72-18 Hunchul Jeong, Kyungbae Park, Sungjin Baek, Dong-Yoon Kim, Moon-Jin Kang, Jungho Cho, Three-dimensional numerical analysis of weld pool in GMAW with fillet joint, International Journal of Precision Engineering and Manufacturing, 19.8; pp. 1171-1177, 2018. doi.org/10.1007/s12541-018-0138-4

60-18 R.W. Geng, J. Du, Z.Y. Wei, G.X. Zhao, An adaptive-domain-growth method for phase field simulation of dendrite growth in arc preheated fused-coating additive manufacturing, IOP Conference Series: Journal of Physics: Conference Series, 1063; 12077, 2018. doi.org/10.1088/1742-6596/1063/1/012077

59-18 Guangxi Zhao, Jun Du, Zhengying Wei, Ruwei Geng, Siyuan Xu, Coupling analysis of molten pool during fused coating process with arc preheating, IOP Conference Series: Journal of Physics, 1063; 12076, 2018. doi.org/10.1088/1742-6596/1063/1/012076

58-18 Siyuan Xu, Zhengying Wei, Jun Du, Guangxi Zhao, Wei Liu, Numerical simulation and analysis of metal fused coating forming, IOP Conference Series: Journal of Physics, 1063; 12075, 2018. doi.org/10.1088/1742-6596/1063/1/012075

55-18 Jason Cheon, Jin-Young Yoon, Cheolhee Kim, Suck-Joo Na, A study on transient flow characteristic in friction stir welding with realtime interface tracking by direct surface calculation, Journal of Materials Processing Technology, 255; pp. 621-634, 2018. doi.org/10.1016/j.jmatprotec.2018.01.021

54-18 V. Sukhotskiy, P. Vishnoi, I. H. Karampelas, S. Vader, Z. Vader, E. P. Furlani, Magnetohydrodynamic drop-on-demand liquid metal additive manufacturing: System overview and modeling, Proceedings, 5th International Conference of Fluid Flow, Heat and Mass Transfer, 155, 2018. doi.org/10.11159/ffhmt18.155

47-18 Santosh Reddy Sama, Jiayi Wang, Guha Manogharan, Non-conventional mold design for metal casting using 3D sand-printing, Journal of Manufacturing Processes, 34.B; pp. 765-776, 2018. doi.org/10.1016/j.jmapro.2018.03.049

38-18 Zhen Chen, Yu Xiang, Zhengying Wei, Pei Wei, Bingheng Lu, Lijuan Zhang, Jun Du, Thermal dynamic behavior during selective laser melting of K418 superalloy: Numerical simulation and experimental verification, Applied Physics A, 124; 313, 2018. doi.org/10.1007/s00339-018-1737-8

19-18 Chenxiao Zhu, Jason Cheon, Xinhua Tang, Suck-Joo Na, Haichao Cui, Molten pool behaviors and their influences on welding defects in narrow gap GMAW of 5083 Al-alloy, International Journal of Heat and Mass Transfer, 126.A; pp. 1206-1221, 2018. doi.org/10.1016/j.ijheatmasstransfer.2018.05.132

16-18 P. Schneider, V. Sukhotskiy, T. Siskar, L. Christie, I.H. Karampelas, E.P. Furlani, K.W. Oh, Additive manufacturing of microfluidic components via wax extrusion, TechConnect Briefs, 3; pp. 162-165, 2018.

9-18 The Furlani Research Group, Magnetohydrodynamic Liquid Metal 3D Printing, Department of Chemical and Biological Engineering, University at Buffalo, 2018.

8-18 Benjamin Himmel, Dominik Rumschöttel, Wolfram Volk, Thermal process simulation of droplet based metal printing with aluminium, Production Engineering, 12; pp. 457–464, 2018. doi.org/10.1007/s11740-018-0819-y

7-18 Yu-Che Wu, Cheng-Hung San, Chih-Hsiang Chang, Huey-Jiuan Lin, Raed Marwan, Shuhei Baba, Weng-Sing Hwang, Numerical modeling of melt-pool behavior in selective laser melting with random powder distribution and experimental validation, Journal of Materials Processing Technology, 254; pp. 72-78, 2018. doi.org/10.1016/j.jmatprotec.2017.11.032

60-17 Pei Wei, Zhengying Wei, Zhen Chen, Yuyang He, Jun Du, Thermal behavior in single track during selective laser melting of AlSi10Mg powder, Applied Physics A: Materials Science & Processing, 123; 604, 2017. doi.org/10.1007/s00339-017-1194-9

49-17 Yu-Che Wu, Weng-Sing Hwang, Cheng-Hung San, Chih-Hsiang Chang, Huey-Jiuan Lin, Parametric study of surface morphology for selective laser melting on Ti6Al4V powder bed with numerical and experimental methods, International Journal of Material Forming, 2017. doi.org/10.1007/s12289-017-1391-2

37-17 V. Sukhotskiy, I. H. Karampelas, G. Garg, A. Verma, M. Tong, S. Vader, Z. Vader, E. P. Furlani, Magnetohydrodynamic drop-on-demand liquid metal 3D printing, 28th Annual International Solid Freeform Fabrication Symposium, 2017.

15-17 I.H. Karampelas, S. Vader, Z. Vader, V. Sukhotskiy, A. Verma, G. Garg, M. Tong, E.P. Furlani, Drop-on-demand 3D metal printing, TechConnect Briefs, 4; pp. 153 – 155, 2017.

14-17 Jason Cheon, Suck-Joo Na, Prediction of welding residual stress with real-time phase transformation by CFD thermal analysis, International Journal of Mechanical Sciences, 131-132; pp. 37-51, 2017. doi.org/10.1016/j.ijmecsci.2017.06.046

91-16 Y. S. Lee and D. F. Farson, Surface tension-powered build dimension control in laser additive manufacturing process, International Journal of Advanced Manufacturing Technology, 85; pp. 1035-1044, 2016. doi.org/10.1007/s00170-015-7974-5

84-16 Runqi Lin, Hui-ping Wang, Fenggui Lu, Joshua Solomon, Blair E. Carlson, Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloys, International Journal of Heat and Mass Transfer, 108; pp. 244-256, 2016. doi.org/10.1016/j.ijheatmasstransfer.2016.12.019

70-16 Hunchul Jeong, Kyunbae Park, Jungho Cho, Numerical analysis of variable polarity arc weld pool, Journal of Mechanical Science and Technology, 30.9; pp. 4307–4313, 2016. doi.org/10.1007/s12206-016-0845-7

68-16 Dongsheng Wu, Xueming Hua, Dingjian Ye, Fang Li, Understanding of humping formation and suppression mechanisms using the numerical simulation, International Journal of Heat and Mass Transfer, 104; pp. 634–643, 2016. doi.org/10.1016/j.ijheatmasstransfer.2016.08.110

58-16 Edward P. Furlani, Fluid mechanics for inkjet printing, Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets, Ed. Stephen D. Hoath, Ch 2; pp. 13-56, 2016. doi.org/10.1002/9783527684724.ch2

39-16 Chien-Hsun Wang, Ho-Lin Tsai, Yu-Che Wu, Weng-Sing Hwang, Investigation of molten metal droplet deposition and solidification for 3D printing techniques, Journal of Micromechanics and Microengineering, 26; 095012, 2016. doi.org/10.1088/0960-1317/26/9/095012

29-16 Scott Vader, Zachary Vader, Ioannis H. Karampelas, Edward P. Furlani, Advances in magnetohydrodynamic liquid metal jet printing, TechConnect Briefs, 4; pp. 379-381, 2016.

26-16 Y.S. Lee, W. Zhang, Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion, Additive Manufacturing, 12.B; pp. 178-188, 2016. doi.org/10.1016/j.addma.2016.05.003

2-16 Edward P. Furlani, Fluid mechanics for inkjet printing, Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets, Ed. Stephen D. Hoath, Ch 2; pp. 13-56, 2016. doi.org/10.1002/9783527684724.ch2

123-15 Koji Tsukimoto, Masashi Kitamura, Shuji Tanigawa, Sachio Shimohata, Masahiko Mega, Laser welding repair for single crystal blades, Proceedings of International Gas Turbine Congress, 2015; pp. 1354-1358, 2015.

122-15 Y.S. Lee, W. Zhang, Mesoscopic simulation of heat transfer and fluid flow in laser powder bed additive manufacturing, Proceedings, 26th Solid Freeform Fabrication Symposium, 2015.

116-15 Yousub Lee, Simulation of laser additive manufacturing and its applications, Thesis, The University of Ohio, 2015.

103-15 Ligang Wu, Jason Cheon, Degala Venkata Kiran, Suck-Joo Na, CFD simulations of GMA welding of horizontal fillet joints based on coordinate rotation of arc models, Journal of Materials Processing Technology, 231; pp. 221-238, 2015. doi.org/10.1016/j.jmatprotec.2015.12.027

96-15 Jason Cheon, Degala Venkata Kiran, Suck-Joo Na, Thermal metallurgical analysis of GMA welded AH36 steel using CFD – FEM framework, Materials & Design, 91; pp. 230-241, 2015. doi.org/10.1016/j.matdes.2015.11.099

86-15 Yousub Lee, Dave F. Farson, Simulation of transport phenomena and melt pool shape for multiple layer additive manufacturing, Journal of Laser Applications, 27; 012006, 2015. doi.org/10.2351/1.4935711

63-15 Scott Vader, Zachary Vader, Ioannis H. Karampelas, Edward P. Furlani, Magnetohydrodynamic liquid metal jet printing, TechConnect Briefs, 4; pp. 379-381, 2015.

46-15 Adwaith Gupta, 3D Printing: Multi-material, single printhead simulation, Advanced Qualification of Additive Manufacturing Materials Workshop, 2015.

21-15 Jungho Cho, Dave F Farson, Kendall J Hollis, John O. Milewski, Numerical analysis of weld pool oscillation in laser welding, Journal of Mechanical Science and Technology, 29.4; pp. 1715-1722, 2015. doi.org/10.1007/s12206-015-0344-2

11-15 Cheng-Han Wu, Weng-Sing Hwang, The effect of process condition of the ink-jet printing process on the molten metallic droplet formation through the analysis of fluid propagation direction, Canadian Journal of Physics, 93.10; 2015. doi.org/10.1139/cjp-2014-0259

95-14 Cheng-Han Wu, Weng-Sing Hwang, The effect of the echo-time of a bipolar pulse waveform on molten metallic droplet formation by squeeze mode piezoelectric inkjet printing, Microelectronics Reliability, 55.3-4; pp. 630-636, 2014. doi.org/10.1016/j.microrel.2014.11.014

82-14 Yousub Lee, Mark Nordin, Sudarsanam Suresh Babu, Dave F. Farson, Effect of fluid convection on dendrite arm spacing in laser deposition, Metallurgical and Materials Transactions B, 45.4; pp. 1520-1529, 2014. doi.org/10.1007/s11663-014-0054-7

59-14 Y.S. Lee, M. Nordin, S.S. Babu, D.F. Farson, Influence of fluid convection on weld pool formation in laser cladding, Welding Journal, 93; 2014.

55-14 Agni Arumugam Selvi, Effect of linear direction oscillation on grain refinement, Thesis, The Ohio State University, 2014.

39-14 Dae-Won Cho, Degala Venkata Kiran, Woo-Hyun Song, Suck-Joo Na, Molten pool behavior in the tandem submerged arc welding process, Journal of Materials Processing Technology, 214.11; pp. 2233-2247, 2014. doi.org/10.1016/j.jmatprotec.2014.04.032

18-14 L.J. Zhang, J.X. Zhang, A. Gumenyuk, M. Rethmeier, S.J. Na, Numerical simulation of full penetration laser welding of thick steel plate with high power high brightness laser, Journal of Materials Processing Technology, 214.8; pp. 1710-1720, 2014. doi.org/10.1016/j.jmatprotec.2014.03.016

17-14 Vahid Bazargan, Effect of substrate cooling and droplet shape and composition on the droplet evaporation and the deposition of particles, Thesis, University of British Columbia, 2015.

12-13 D.W. Cho, S.J. Na, M.H. Cho, J.S. Lee, A study on V-groove GMAW for various welding positions, Journal of Materials Processing Technology, 213.9; pp. 1640-1652, 2013. doi.org/10.1016/j.jmatprotec.2013.02.015

1-13 Dae-Won Cho, Suck-Joo Na, Min-Hyun Cho, Jong-Sub Lee, Simulations of weld pool dynamics in V-groove GTA and GMA welding, Welding in the World, 57; pp. 223-233, 2013. doi.org/10.1007/s40194-012-0017-z

63-12  D.W. Cho, S.H. Lee, S.J. Na, Characterization of welding arc and weld pool formation in vacuum gas hollow tungsten arc welding, Journal of Materials Processing Technology, 2012. doi.org/10.1016/j.jmatprotec.2012.09.024

55-12 Hejun Li, Pengyun Wang, Lehua Qi, Hansong Zuo, Songyi Zhong, Xianghui Hou, 3D numerical simulation of successive deposition of uniform molten Al droplets on a moving substrate and experimental validation, Computational Materials Science, 65; pp. 291–301, 2012.

77-10  Lim, Y. C.; Yu, X.; Cho, J. H.; et al., Effect of magnetic stirring on grain structure refinement Part 1-Autogenous nickel alloy welds, Science and Technology of Welding and Joining, 15.7; pp. 583-589, 2010. doi.org/10.1179/136217110X12720264008277

18-10 K Saida, H Ohnishi, K Nishimoto, Fluxless laser brazing of aluminium alloy to galvanized steel using a tandem beam–dissimilar laser brazing of aluminium alloy and steels, Welding International, 2010

58-09  Cho, Jung-Ho; Farson, Dave F.; Milewski, John O.; et al., Weld pool flows during initial stages of keyhole formation in laser welding, Journal of Physics D-Applied Physics, 42.17; 175502, 2009. doi.org/10.1088/0022-3727/42/17/175502

57-09  Lim, Y. C.; Farson, D. F.; Cho, M. H.; et al., Stationary GMAW-P weld metal deposit spreading, Science and Technology of Welding and Joining, 14.7; pp. 626-635, 2009. doi.org/10.1179/136217109X441173

1-09 J.-H. Cho and S.-J. Na, Three-Dimensional Analysis of Molten Pool in GMA-Laser Hybrid Welding, Welding Journal, 88; 2009.

52-07   Huey-Jiuan Lin and Wei-Kuo Chang, Design of a sheet forming apparatus for overflow fusion process by numerical simulation, Journal of Non-Crystalline Solids 353 (2007) 2817–2825.

50-07  Cho, Min Hyun; Farson, Dave F., Understanding bead hump formation in gas metal arc welding using a numerical simulation, Metallurgical and Mateials Transactions B-Process Metallurgy and Materials Processing Science, Volume: 38, Issue: 2, Pages: 305-319, doi.org/10.1007/s11663-007-9034-5, April 2007

49-07  Cho, M. H.; Farson, D. F., Simulation study of a hybrid process for the prevention of weld bead hump formation, Welding Journal Volume: 86, Issue: 9, Pages: 253S-262S, September 2007

48-07  Cho, M. H.; Farson, D. F.; Lim, Y. C.; et al., Hybrid laser/arc welding process for controlling bead profile, Science and Technology of Welding and Joining, Volume: 12 Issue: 8, Pages: 677-688, doi.org/10.1179/174329307X236878, November 2007

47-07   Min Hyun Cho, Dave F. Farson, Understanding Bead Hump Formation in Gas Metal Arc Welding Using a Numerical Simulation, Metallurgical and Materials Transactions B, 38.2; pp. 305-319, 2007.

36-06  Cho, M. H.; Lim, Y. C.; Farson, D. F., Simulation of weld pool dynamics in the stationary pulsed gas metal arc welding process and final weld shape, Welding Journal, 85.12; pp. 271S-283S, 2006.