FLOW-3D Workshops: Multiphysics

FLOW-3D Multiphysics Workshops

FLOW-3D Multiphysics Workshops

Build hands-on CFD expertise and learn how you can use FLOW-3D‘s powerful multiphysics simulation capabilities to solve complex problems in support of industry needs. This workshop has a broader scope than application-specific workshops, and focuses on introducing a wide range physics models relevant to:

  • Aerospace
  • Automotive
  • Consumer Products
  • Food & Beverage
  • Microfluidics and Biomedical Engineering
  • Coating

In this 4-hour online workshop, you will learn how to set up simulations, apply the relevant physics to your models, analyze and interpret your simulation results, and will learn about general simulation best practices. Following the workshop, you are invited to work with one of our CFD specialists to build your own use cases with your 30-day FLOW-3D license.

Workshop Details

  • Workshops are online, hosted through Zoom
  • Registration is limited to 10 attendees
  • Cost: $499 (private sector); $299 (government)
  • 30 day FLOW-3D license*

*See our Registration and Licensing Policy

Workshop Dates

Multiphysics workshops run from 12pm – 4pm ET.

  • September 27, 2023

‘In-house’ and online workshops are available for organizational teams of up to ten attendees; for more information and scheduling, contact Workshop Support.

What will you learn?

  • How to import geometry and set up models, including meshing and initial and boundary conditions
  • How to add capture coupled physics with models such as electrokinetics, heat transfer, and Lagrangian particles
  • How to use sophisticated visualization tools to effectively analyze and convey simulation results

What happens after the workshop?

  • After the workshop, your license will be extended for 30 days. During this time you will have the support of one of our CFD engineers who will help you work through your specifics. You will also have access to our web-based training videos covering introductory through advanced modeling topics. 

Who should attend?

  • Researchers, scientists and engineers working in the fields of consumer product design, automotive or aerospace engineering, or coating research.

Are private workshops available?

Yes! ‘In-house’ workshops are available for organizational teams of up to ten attendees; for more information and scheduling, contact Workshop Support.

  • A Windows machine running 64-bit Windows 10
  • An external mouse (not a touchpad device)
  • Dual monitor setup recommended
  • Dedicated graphics card; nVidia Quadro card required for remote desktop
For more info on recommended hardware, see our Supported Platforms page.

Registration: Workshop licenses are available to prospective users in the US, Canada, the UK, and Ireland. Prospective users outside of these countries should contact their distributor to inquire about workshops. Existing users should contact sales@flow3d.com to discuss their licensing options.

Cancellation: Flow Science reserves the right to cancel a workshop at any time, due to reasons such as insufficient registrations or instructor unavailability. In such cases, a full refund will be given, or attendees may opt to transfer their registration to another workshop. Flow Science is not responsible for any costs incurred.

Registrants who are unable to attend a workshop may cancel up to one week in advance to receive a full refund. Attendees must cancel their registration by 5:00 pm MST one week prior to the date of the workshop; after that date, no refunds will be given. If available, an attendee can also request to have their registration transferred to another workshop.

Licensing: Workshop licenses are for evaluation purposes only, and not to be used for any commercial purpose other than evaluation of the capabilities of the software.

Register for a Multiphysics Workshop

Register for an Online Microfluidics Workshop
Registration Type *

Workshop License Terms and Conditions *
Request for Workshop Certificate
Certificates will be in PDF format. Flow Science does not confirm that our workshops are eligible for PDHs or CEUs.
FLOW-3D News
Privacy *

Please note: Once you click 'Register', you will be directed to our PayPal portal. If you do not have a PayPal account, choose the 'Pay with credit card' option. Your registration is not complete until you have paid.

If you need assistance with the registration process, please contact Workshop Support.

About the Instructor

Karthik Ramaswamy, FLOW-3D CFD Engineer

Karthik Ramaswamy is a Senior CFD Engineer with Flow Science, where he uses CFD to investigate and solve problems in microfluidics, biomedical engineering, complex fluids, and consumer product manufacturing processes. He also works in hydrodynamic modeling for civil infrastructure, coastal engineering, municipal, marine and water/environmental applications. Karthik holds a M.S. in Aerospace Engineering from the University of Illinois at Urbana-Champaign.

Request More Information

FLOW-3D AM WELD Request Info

What additive manufacturing processes do you want to simulate? *
What laser welding processes do you want to simulate? *
FLOW-3D News
Privacy *