Tech Papers
Follow one of the links below to find published articles of interest in these application areas:
Aerospace
Casting
Coating
Microfluidics
Maritime
Water & Environmental
General Applications
Last Updated: June 2009
Submit a Paper!
Do you have a published paper that includes an application of FLOW-3D? Click here to submit a paper.
Recent Publications
21-09 
A. Pari, Optimization of HPDC Process Using Flow Simulation-Case Studies, Die Casting Engineer, July 2009
20-09 M. Sirvio, M. Wos, Casting directly from a computer model by using advanced simulation software, FLOW-3D Cast, Archives of Foundry Engineering Volume 9, Issue 1/2009, 79-82
19-09 Andrei Starobin, C.W. Hirt, D. Goettsch, A Model for Binder Gas Generation and Transport in Sand Cores and Molds, Modeling of Casting, Welding, and Solidification Processes XII, TMS (The Minerals, Metals & Minerals Society), June 2009
18-09 Basu, D., S. Green, K. Das, R. Janetzke, and J. Stamatakos, “Numerical Simulation of Surface Waves Generated by a Subaerial Landslide at Lituya Bay, Alaska,” 28th International Conference on Ocean, Offshore and Arctic Engineering, May 31–June 5, 2009, Honolulu, Hawaii
17-09 Das, K., R. Janetzke, D. Basu, S. Green, and J. Stamatakos, “Numerical Simulations of Tsunami Wave Generation by Submarine and Aerial Landslides Using RANS and SPH Models,” 28th International Conference on Ocean, Offshore and Arctic Engineering, May 31–June 5, 2009, Honolulu, Hawaii
16-09 Basu, D., S. Green, K. Das, R. Janetzke, and J. Stamatakos, “Navier-Stokes Simulations of Surface Waves Generated by Submarine Landslides: Effect of Slide Geometry and Turbulence,” 2009 Society of Petroleum Engineering Americas E&P Environmental & Safety Conference, March 23–25, 2009, San Antonio, Texas
15-09 Kaushik Das, Steve Green, Debashis Basu, Ron Janetzke, and John Stamatakos, Effect of Slide Deformation and Geometry on Waves Generated by Submarine Landslides: A Numerical Investigation, Copyright 2009, Offshore Technology Conference, Houston, Texas, USA, May 4-7, 2009
TN 83 Brethour, J.M. and Hirt, C.W., Drift Model for Two-Component Flows, Flow Science Technical Note #83, FSI-09-TN83
13-09 E.P. Furlani, M.C. Carter, Analysis of an Electrostatically Actuated MEMS Drop Ejector, Presented at Nanotech Conference & Expo 2009, Houston, Texas, USA, May 3-7, 2009
12-09 A. Chandorkar, S. Palit, Simulation of Droplet-Based Microfluidics Devices Using a Volume-of-Fluid (VOF) Approach, Presented at Nanotech Conference & Expo 2009, Houston, Texas, USA, May 3-7, 2009
11-09 Michael Barkhudarov, Minimizing Air Entrainment in a Shot Sleeve during Slow-Shot Stage, Die Casting Engineer (The North American Die Casting Association ISSN 0012-253X), May 2009
10-09 A. Reikher, H. Gerber, Application of One-Dimensional Numerical Simulation to Optimize Process Parameters of a Thin-Wall Casting in High Pressure Die Casting, Die Casting Engineer (The North American Die Casting Association ISSN 0012-253X), May 2009
TN 82 Brethour, J.M., Improved Generalized Minimal Residual (GMRES) Solver in FLOW-3D—How it works and when to use it, Flow Science Technical Note #82, FSI-09-TN82
TN 81 Tota, Prasad V., Turbulent Flow Over a Backward-Facing Step Using the RNG k-ε Model, Flow Science Technical Note #81, FSI-09-TN81