FLOW-3D Technical Publications
13-12 Chi-Feng Lin, Bo-Kai Wang, Carlos Tiu and Ta-Jo Liu, On the Pinning of Downstream Meniscus for Slot Die Coating, Advances in Polymer Technology, Vol. 00, No. 0, 1-9 (2012) © 2012 Wiley Periodicals, Inc. Available online at Wiley.
12-12 Andrei Starobin, Tony Hirt, Hubert Lang, and Matthias Todte, Core drying simulation and validation, International Foundry Research, GIESSEREIFORSCHUNG 64 (2012) No. 1, ISSN 0046-5933, pp 2-5
11-12 Sang-Ho Oh, Young Min Oh, Ji-Young Kim, Keum-Seok Kang, A case study on the design of condenser effluent outlet of thermal power plant to reduce foam emitted to surrounding seacoast, Ocean Engineering, Volume 47, June 2012, Pages 58–64. Available for purchase online at SciVerse.
10-12 H. Vladimir Martínez and Marco F. Valencia (2012). Semisolid Processing of Al/β-SiC Composites by Mechanical Stirring Casting and High Pressure Die Casting, Recent Researches in Metallurgical Engineering - From Extraction to Forming, Dr Mohammad Nusheh (Ed.), ISBN: 978-953-51-0356-1, InTech, Available from: http://www.intechopen.com/books/recent-researches-in-metallurgical-engineering-from-extraction-to-forming/semisolid-processing-of-al-sic-composites-by-mechanical-stirring-casting-high-pressure-die-casting
09-12 Selahattin Kocaman, Hatice Ozmen-Cagatay, The effect of lateral channel contraction on dam break flows: Laboratory experiment, Journal of Hydrology 432–433 (2012) 145–153, Available online 25 February 2012. Available for purchase online at Science Direct.
08-12 N. S. Bakanovichus, A. B. Veksler, V. I. Klimovich, V. A. Prokof’ev, G. A. Sudol’skii, I. N. Shatalina and A. M. Shvainshtein, Hydraulic and ice-temperature investigations of water-development works under the B. E. Vedeneev All-Russian Scientific-Research Institute of Hydraulic Engineering (VNIIG im. B. E. Vedeneeva), Power Technology and Engineering (formerly Hydrotechnical Construction), DOI: 10.1007/s10749-012-0285-1, March 2012, Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 9, September 2011, pp. 23 – 31. Available online at SpringerLink.
07-12 Amir H. G. Isfahani and James M. Brethour, Simulating Thermal Stresses and Cooling Deformations, Die Casting Engineer, March 2012
06-12 Shuisheng Xie, Youfeng He and Xujun Mi, Study on Semi-solid Magnesium Alloys Slurry Preparation and Continuous Roll-casting Process, Magnesium Alloys - Design, Processing and Properties, ISBN: 978-953-307-520-4, InTech.
05-12 Hou Caishui, Three-dimensional Numerical Analysis of Flow Pattern in Pressure Forebay of Hydropower Station, http://dx.doi.org/10.1016/j.proeng.2012.01.694, Procedia Engineering, Volume 28, 2012, Pages 128–135, 2012 International Conference on Modern Hydraulic Engineering, February 2012. Available online at SciVerse.
04-12 J. Spangenberg, N. Roussel, J.H. Hattel, H. Stang, J. Skocek, M.R. Geiker, Flow induced particle migration in fresh concrete: Theoretical frame, numerical simulations and experimental results on model fluids, Cement and Concrete Research, http://dx.doi.org/10.1016/j.cemconres.2012.01.007, February 2012. Available online at: SciVerse.
03-12 Hamed Taghizadeh, Seyed Ali Akbar Salehi Neyshabour and Firouz Ghasemzadeh, Dynamic Pressure Fluctuations in Stepped Three-Side Spillway, Iranica Journal of Energy & Environment 3 (1): 95-104, 2012, ISSN 2079-2115
02-12 Kim, Seojun, Yu, Kwonkyu, Yoon, Byungman, and Lim, Yoonsung, A numerical study on hydraulic characteristics in the ice Harbor-type fishway, KSCE Journal of Civil Engineering, 2012-02-01, Issn: 1226-7988, pp 265- 272, Volume: 16, Issue: 2, Doi: 10.1007/s12205-012-0010-5. Available for purchase online at SpringerLink.