Home      |     Contact Us      |     Users Site SEARCH:       


Recent Publications

22-09 M.A. Bhinder, C.G. Mingham, D.M. Causon, M.T. Rahmati, G.A. Aggidis and R.V. Chaplin, A Joint Numerical And Experimental Study Of a Surging Point Absorbing Wave Energy Converter (WRASPA), Proceedings of the ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2009-79392, Honolulu, Hawaii, May 31-June 5, 2009

21-09  PDF icon A. Pari, Optimization of HPDC Process Using Flow Simulation-Case Studies, Die Casting Engineer, July 2009

20-09  PDF icon M. Sirvio, M. Wos, Casting directly from a computer model by using advanced simulation software, FLOW-3D Cast, Archives of Foundry Engineering Volume 9, Issue 1/2009, 79-82

19-09  PDF icon Andrei Starobin, C.W. Hirt, D. Goettsch, A Model for Binder Gas Generation and Transport in Sand Cores and Molds, Modeling of Casting, Welding, and Solidification Processes XII, TMS (The Minerals, Metals & Minerals Society), June 2009

18-09  Basu, D., S. Green, K. Das, R. Janetzke, and J. Stamatakos, “Numerical Simulation of Surface Waves Generated by a Subaerial Landslide at Lituya Bay, Alaska,” 28th International Conference on Ocean, Offshore and Arctic Engineering, May 31–June 5, 2009, Honolulu, Hawaii

17-09  Das, K., R. Janetzke, D. Basu, S. Green, and J. Stamatakos, “Numerical Simulations of Tsunami Wave Generation by Submarine and Aerial Landslides Using RANS and SPH Models,” 28th International Conference on Ocean, Offshore and Arctic Engineering, May 31–June 5, 2009, Honolulu, Hawaii

16-09  Basu, D., S. Green, K. Das, R. Janetzke, and J. Stamatakos, “Navier-Stokes Simulations of Surface Waves Generated by Submarine Landslides: Effect of Slide Geometry and Turbulence,” 2009 Society of Petroleum Engineering Americas E&P Environmental & Safety Conference, March 23–25, 2009, San Antonio, Texas

15-09  PDF icon Kaushik Das, Steve Green, Debashis Basu, Ron Janetzke, and John Stamatakos, Effect of Slide Deformation and Geometry on Waves Generated by Submarine Landslides: A Numerical Investigation, Copyright 2009, Offshore Technology Conference, Houston, Texas, USA, May 4-7, 2009

TN 83 Brethour, J.M. and Hirt, C.W., Drift Model for Two-Component Flows, Flow Science Technical Note #83, FSI-09-TN83

13-09  PDF icon E.P. Furlani, M.C. Carter, Analysis of an Electrostatically Actuated MEMS Drop Ejector, Presented at Nanotech Conference & Expo 2009, Houston, Texas, USA, May 3-7, 2009

12-09  PDF icon A. Chandorkar, S. Palit, Simulation of Droplet-Based Microfluidics Devices Using a Volume-of-Fluid (VOF) Approach, Presented at Nanotech Conference & Expo 2009, Houston, Texas, USA, May 3-7, 2009

11-09  PDF icon Michael Barkhudarov, Minimizing Air Entrainment in a Shot Sleeve during Slow-Shot Stage, Die Casting Engineer (The North American Die Casting Association ISSN 0012-253X), May 2009

10-09 PDF icon A. Reikher, H. Gerber, Application of One-Dimensional Numerical Simulation to Optimize Process Parameters of a Thin-Wall Casting in High Pressure Die Casting, Die Casting Engineer (The North American Die Casting Association ISSN 0012-253X), May 2009

TN 82 Brethour, J.M., Improved Generalized Minimal Residual (GMRES) Solver in FLOW-3D—How it works and when to use it, Flow Science Technical Note #82, FSI-09-TN82