FLOW-3D News
Summer 2006
Recent Publications
Linked articles are downloadable. Use a PDF viewer or Adobe Acrobat to view. If an article is not linked to our online library, call or email us at Flow Science and we will send you a copy.
12-06 
G.
D. Grayson, A. Lopez, F. O. Chandler, L. J. Hastings, S. P. Tucker, Cryogenic
Tank Modeling for the Saturn AS-203 Experiment, AIAA 2006-5258, presented
at the 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July
9-12, 2006, Sacramento, CA.
11-06 A.
K. Sen, J. Darabi, D. R. Knapp and J. Liu, Modeling and Characterization
of a Carbon Fiber Emitter for Electrospray Ionization, 1 MEMS and Microsystems
Laboratory, Department of Mechanical Engineering, University of South Carolina,
300 Main Street, Columbia, SC 29208, USA, 2 Department of Pharmacology, Medical
University of South Carolina, Charleston, SC
10-06 Gengsheng Wei, An
Implicit Method to Solve Problems of Rigid Body Motion Coupled with Fluid Flow,
Flow Science Technical Note #76, FSI-05-TN76.
9-06 M.
Ivosevic, R. A. Cairncross, R. Knight, T. E. Twardowski, V. Gupta, Drexel University,
Philadelphia, PA; J. A. Baldoni, Duke University, Durham, NC, Effect of Substrate
Roughness on Splatting Behavior of HVOF Sprayed Polymer Particles: Modeling and
Experiments, International
Thermal Spray Conference, Seattle, WA, May 2006.
8-06 Gengsheng
Wei, Three-Dimensional
Collision Modeling for Rigid Bodies and its Coupling with Fluid Flow Computation, Flow
Science Technical Note #75, FSI-06-TN75.
7-06 M.Y.Smirnov,
Y.V.Golenkov, Manufacturing
of Cast Iron Bath Tubs Castings using Vacuum-Process in Russia, Russia's
Foundryman, July 2006. In Russian.
6-06 M.
Barkhudarov, and G. Wei, Modeling
of the Coupled Motion of Rigid Bodies in Liquid Metal, Modeling of Casting,
Welding and Advanced Solidification Processes - XI, May 28 - June 2, 2006, Opio,
France, eds. Ch.-A. Gandin and M. Bellet, pp 71-78, 2006.
5-06 E.
P. Furlani, B. G. Price, G. Hawkins and A. G. Lopez, Thermally Induced Marangoni
Instability of Liquid Microjets with Application to Continuous Inkjet Printing,
Proceedings of NSTI Nanotech Conference 2006, Vol. 2, pp 534-537.
Previous: Comings & Goings | Next: Newsletters