FLOW-3D News
Fall 2003
Recent Publications
Linked articles are downloadable. Use a PDF viewer or Adobe Acrobat to view. If an article is not linked to our online library, call or email us at Flow Science and we will send you a copy.
20-03 James Brethour, Filling and Emptying of Gravure Cells-A CFD Analysis, Convertech Pacific October 2002, Vol. 10, No 4, p 34-37
19-03 
James Brethour, Incremental
Elastic Stress Model,
Flow Science Technical Note (FSI-03-TN64)
18-03 Michael Barkhudarov, Semi-Lagrangian
VOF Advection Method for FLOW-3D,
Flow Science Technical Note (FSI-03-TN63)
17-03 John Uebbing, Switching
Fiber-optic Circuits with Microscopic Bubbles,
Sensors Magazine, May 2003, Vol 20, No 5, p 36-42
16-03 CFD Speeds Development of MEMS-based Printing Technology, MicroNano Magazine, June 2003, Vol. 8, No 6, P 16
15-03 Ho, Dr K H, Boyes, S M, Donohoo, S M, Investigation
of Spillway Behaviour Under Increased Maximum Flood by Computational Fluid Dynamics
Technique, Proc Conf 14th Australasian Fluid mechanics, Adelaide,
Australia, December 2001, 577-580
14-03 Ho, Dr K H, Donohoo, S M, Boyes, K M, Lock, C C, Numerical
Analysis and the Real World: It Looks Pretty, but is It Right?,
Proceedings of the NAFEMS World Congress, May 2003, Orlando, FL
13-03 Brethour, J M, Sediment
Scour,
Flow Science Technical Note (FSI-03-TN62)
12-03 J-C Gebelin & M.R. Jolly, Modelling Filters in Light Alloy Casting Processes, Trans AFS, 2002, 110, pp. 109-120.
11-03 M.R. Jolly, Casting Simulation: How
Well Do Reality and Virtual Casting Match? A State of the Art Review, Intl.
J. Cast Metals Research, 2002, 14, pp. 303-313.
10-03 Gebelin., J-C and Jolly, M.R., Modelling
of the Investment Casting Process, Journal of Materials Processing Tech.,
Vol. 135/2-3, pp. 291-300.
9-03 Cox, M, Harding, R.A. and Campbell, J., Optimised Running System Design for Bottom Filled Aluminium Alloy 2L99 Investment Castings, J. Mat. Sci. Tech., May 2003, Vol. 19, pp. 613-625.
8-03 Von Alexander Schrey and Regina Reek, Numerische Sumulation der Kernherstellung (Numerical Simulation of Core Blowing), Giesserei, June 2003, pp 64-68 (in German)
7-03 J. Zuidema Jr., L Katgerman, Cyclone Separation of Particles in Aluminum DC Casting, Modeling of Casting, Welding, and Advanced Solidification Processes X, Interdisciplinary Research Centre in Materials Processing, Netherlands Institute for Metals Research, Delft University of Technology, TMS, 2003, pp 607-614
6-03 Jean-Christophe Gebelin and Mark Jolly, Numerical Modeling of Metal Flow Through Filters, Modeling of Casting, Welding, and Advanced Solidification Processes X, Interdisciplinary Research Centre in Materials Processing, University of Birmingham, TMS, 2003, pp 431-438
5-03 N. W. Lai, W. D, Griffiths, and J Campbell, Modeling of the Potential for Oxide Film Entrainment in Light Metal Alloy Castings, Modeling of Casting, Welding, and Advanced Solidification Processes X, Interdisciplinary Research Centre in Materials Processing, University of Birmingham, TMS, 2003, pp 415-422
4-03 M. Toivakka, Numerical Investigation of Droplet Impact Spreading in Spray Coating of Paper, in proceedings of 2003 TAPPI 8th Advanced Coating Fundamentals Symposium, TAPPI Press, Atlanta, 2003