20-03 James Brethour, Filling and Emptying of Gravure Cells-A CFD Analysis, Convertech Pacific October 2002, Vol. 10, No 4, p 34-37
19-03 James Brethour, Incremental Elastic Stress Model, Flow Science Technical Note (FSI-03-TN64)
18-03 Michael Barkhudarov, Semi-Lagrangian VOF Advection Method for FLOW-3D, Flow Science Technical Note (FSI-03-TN63)
17-03 John Uebbing, Switching Fiber-optic Circuits with Microscopic Bubbles, Sensors Magazine, May 2003, Vol 20, No 5, p 36-42
16-03 CFD Speeds Development of MEMS-based Printing Technology, MicroNano Magazine, June 2003, Vol. 8, No 6, P 16
15-03 Ho, Dr K H, Boyes, S M, Donohoo, S M, Investigation of Spillway Behaviour Under Increased Maximum Flood by Computational Fluid Dynamics Technique, Proc Conf 14th Australasian Fluid mechanics, Adelaide, Australia, December 2001, 577-580
14-03 Ho, Dr K H, Donohoo, S M, Boyes, K M, Lock, C C, Numerical Analysis and the Real World: It Looks Pretty, but is It Right?, Proceedings of the NAFEMS World Congress, May 2003, Orlando, FL;
13-03 Brethour, J M, Sediment Scour, Flow Science Technical Note (FSI-03-TN62)
12-03 J-C Gebelin & M.R. Jolly, Modelling Filters in Light Alloy Casting Processes, Trans AFS, 2002, 110, pp. 109-120.
11-03 M.R. Jolly, Casting Simulation: How Well Do Reality and Virtual Casting Match? A State of the Art Review, Intl. J. Cast Metals Research, 2002, 14, pp. 303-313.
10-03 Gebelin., J-C and Jolly, M.R., Modelling of the Investment Casting Process, Journal of Materials Processing Tech., Vol. 135/2-3, pp. 291-300.
9-03 Cox, M, Harding, R.A. and Campbell, J., Optimised Running System Design for Bottom Filled Aluminium Alloy 2L99 Investment Castings, J. Mat. Sci. Tech., May 2003, Vol. 19, pp. 613-625.
8-03 Von Alexander Schrey and Regina Reek, Numerische Sumulation der Kernherstellung (Numerical Simulation of Core Blowing), Giesserei, June 2003, pp 64-68 (in German)
7-03 J. Zuidema Jr., L Katgerman, Cyclone Separation of Particles in Aluminum DC Casting, Modeling of Casting, Welding, and Advanced Solidification Processes X, Interdisciplinary Research Centre in Materials Processing, Netherlands Institute for Metals Research, Delft University of Technology, TMS, 2003, pp 607-614
6-03 Jean-Christophe Gebelin and Mark Jolly, Numerical Modeling of Metal Flow Through Filters, Modeling of Casting, Welding, and Advanced Solidification Processes X, Interdisciplinary Research Centre in Materials Processing, University of Birmingham, TMS, 2003, pp 431-438
5-03 N. W. Lai, W. D, Griffiths, and J Campbell, Modeling of the Potential for Oxide Film Entrainment in Light Metal Alloy Castings, Modeling of Casting, Welding, and Advanced Solidification Processes X, Interdisciplinary Research Centre in Materials Processing, University of Birmingham, TMS, 2003, pp 415-422
4-03 M. Toivakka, Numerical Investigation of Droplet Impact Spreading in Spray Coating of Paper, in proceedings of 2003 TAPPI 8th Advanced Coating Fundamentals Symposium, TAPPI Press, Atlanta, 2003