Tech Papers
Follow one of the links below to find published articles of interest in these application areas:
Aerospace
Casting
Coating
Microfluidics
Maritime
Water & Environmental
General Applications
Last Updated: June 2008
Submit a Paper!
Do you have a published paper that includes an application of FLOW-3D? Click here to submit a paper.
Recent Publications
19-08 
Mark Littler, Simulation Eliminates Die Casting Scrap, ECS Casting Innovations, July/August 2008
18-08 Efrem Teklemariam, Bernie Shumilak, Don Murray, and Graham K. Holder, Combining Computational and Physical Modeling to Design the Keeyask Station, Hydro Review, © HCI Publications, July 2008
17-08 James, M. R., Lane, S. J. & Corder, S. B., Modelling the rapid near-surface expansion of gas slugs in low-viscosity magmas, In Lane S. J., Gilbert J. S. (eds) Fluid Motion in Volcanic Conduits: A Source of Seismic and Acoustic Signals. Geol. Soc., London, Spec. Pub., 307, 147-167, doi: 10.1144/SP307.9. 2008
16-08 Stefano Malavasi, Nicola Trabucchi, Numerical Investigation of the Flow Around a Rectangular Cylinder Near a Solid Wall, BBAA VI International Colloquium on: Bluff Bodies Aerodynamics & Applications, Milano, Italy, July 2008
15-08 Jorge D. Abad; Bruce L. Rhoads; İnci Güneralp; and Marcelo H. García, Flow Structure at Different Stages in a Meander-Bend with Bendway Weirs, Journal of Hydraulic Engineering © ASCE, August 2008
TN80 C.W. Hirt, Simulating the Residue left by Evaporating Drops, Flow Science Technical Note #80, FSI-08-TN80
13-08 T. Yoshimura, K. Yano, T. Fukui, S. Yamamoto, S. Nishido, M. Watanabe and Y. Nemoto, Optimum Design of Die Casting Plunger Tip Considering Air Entrainment, Proceedings of 10th Asian Foundry Congress (AFC10), Nagoya, Japan, May 2008
TN79 Wei, Gengsheng, “The Elastic Membrane and Wall Model in FLOW-3D,” Flow Science Technical Note #79, FSI-08-TN79
11-08 Sreenivasa C. Chopakatla, Thomas C. Lippmann and John E. Richardson, Field Verification of a Computational Fluid Dynamics Model for Wave Transformation and Breaking in the Surf Zone, J. Wtrwy., Port, Coast., and Oc. Engrg., Volume 134, Issue 2, pp. 71-80 (March/April 2008) Abstract Only
TN78 Brethour, James, The Non-Condensable Gas Model in FLOW-3D
09-08 M. Ren and H. Wijshoff, Thermal effect on the penetration of an ink droplet onto a porous medium, Proc. Eurotherm2008 MNH, 1 (2008)
08-08 Stephen Instone, Andreas Buchholz and Gerd-Ulrich Gruen, Inclusion Transport Phenomena in Casting Furnaces, Light Metals 2008 p 811-816, TMS (The Minerals, Metals & Materials Society), 2008
07-08 P. Scarber, Jr., H. Littleton, Simulating Macro-Porosity in Aluminum Lost Foam Castings, AFS Transactions 2008 © American Foundry Society, CastExpo ’08, Atlanta, Georgia, May 2008
06-08 A. Reikher, H. Gerber, A. Starobin, Multi-Stage Plunger Deceleration System, CastExpo ’08 NADCA, Atlanta, Georgia, May 2008